SENKO SI-100C, Operating Manual

Page: 2 / 13

2
ⓒ
Copyright SENKO CO., LTD.
This manual contains operating instructions for stationary gas monitoring instruments
designed for area air quality and safety applications, and should be STUDIED CAREFULLY
by all persons responsible for the operation and maintenance of the instruments. All
SENKO equipment described herein is designed or manufactured for use only as set forth
herein and by the labels affixed, or other literature accompanying the product.
Where WARNINGS or CAUTIONS are herein set forth, they must be followed. If SENKO
equipment is used in a manner or under conditions not specifically authorized or
prescribed by this manual, or by other materials or written instructions either
accompanying the product or authorized by SENKO in writing, or if it is used or
maintained by unqualified or improperly trained personnel, SENKO Co., Ltd. disclaims all
responsibility of every kind for said equipment. While basic connection installation
instructions are included, all equipment must be installed by qualified personnel.
FOLLOWING ALL ASPECTS OF THE LOCAL CODE REQUIREMENTS. Also, the instruments
must be calibrated and alarms tested periodically by trained personnel for proper
functioning of the instruments.
CAUTION: The overall system, especially where gas monitoring sensors are used, must
be CALIBRATED BY QUALIFIED PERSONNEL. Thereafter, a monthly calibration check is
recommended to assure reliability and accuracy.
Please call the factory if any problems are encountered.
WARRANTY
SENKO sensors and instruments are designed for area air quality and safety applications.
SENKO gas monitoring instruments are provided with a one year warranty. This warranty
covers only defective parts or workmanship in normal use and service. Instruments
which fail to function due to factory defect
Within one year of date of shipment are to be returned to SENKO for warranty repair.
SENKO will determine the nature and responsibility for the defect. In all cases the
warranty is limited to the original cost of the equipment. Any misuse of equipment is the
custom
er’ s responsibility. SENKO will either repair or replace (at SENKO ’ s option)
returned instruments subject to the warranty, at no charge. No field service is included
in this warranty. For field service requirements please contact SENKO.
This warranty is voided by:
1. Improper application of instrument.
2. Misuse of instrument.
3. Intentional or accidental damaging of instrument.
4. Not returning the sensor to factory for warranty validation.
For any queries regarding warranty repair or replacements, please include the
instrument model and serial number in any transmittals to SENKO. SENKO instruments
are supplied with operating and installation manuals and other literature. These are the
only source of specific details regarding proper operation and maintenance of the
equipment. These instructions must be carefully read and the precautions followed in
detail. Instruments must be calibrated and alarms checked periodically to
assure proper equipment operation. Please refer to the manual for details.
WARNING
Read this manual carefully before using the instrument. The instrument
will perform as designed only if it is used and maintained in accordance
with the manufacturer's instruction. Otherwise, it could fail to perform as
designed and persons who rely on this instrument for their safety could
sustain serious personal injury or death.