9 - EN
WWW.SENIXTOOLS.COM
application – The correct power
tool will do the job better and
safer at the rate for which it was
designed.
b) Do not use the power tool if
the switch does not turn it on
and off – Any power tool that
cannot be controlled with the
switch is dangerous and must be
repaired.
c) Disconnect the battery pack
from the power tool before
making any adjustments,
changing accessories, or storing
power tools – Such preventive
safety measures reduce the
risk of starting the power tool
accidentally.
d) Store idle power tools out of the
reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool –
Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools. Check
for misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool’s operation.
If damaged, have the power
tool repaired before use – Many
accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and
clean – Properly maintained
cutting tools with sharp cutting
edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories
and tool bits etc., in accordance
with these instructions and in
the manner intended for the
particular type of power tool,
taking into account the working
conditions and the work to be
performed – Use of the power
tool for operations different from
those intended could result in a
hazardous situation.
5) Service
a) Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
ADDITIONAL SAFETY RULES
FOR POLE HEDGE TRIMMER
a) Remove any blade that has
been damaged. Always make
sure that the blade is installed
correctly and securely fastened
before each use. Failure to do
so can cause serious injury.
b) Hold the pole hedge trimmer by
insulated gripping surfaces only,
