Senix CSE12-M, Operator'S Manual

Page: 4 / 68

4 WWW.SENIXTOOLS.COM
ON/OFF SWITCH.
• Use the right tool.
Only use this tool for
its intended purpose.
• Always hold the unit with both hands when
RSHUDWLQJ.HHSD¿UPJULSRQERWKKDQGOHV
or grips.
•
DO NOT
overreach. Always keep proper
footing and balance. Take extra care when
working on stairs, steep slopes or inclines.
To avoid serious injury,
DO NOT
operate
the unit while on a ladder or a roof.
• Keep hands, face, and feet away from all
moving parts.
DO NOT
touch or try to stop
moving parts.
•
DO NOT WRXFKWKHHQJLQHRUPXIÀHU7KHVH
parts get extremely hot from operation,
even after the unit is turned off.
•
DO NOT
operate the unit faster than the
speed needed to do the job.
DO NOT
run
the unit at high speed when not in use.
•
DO NOT
force the unit. It will do a better,
safer job when used at the intended rate.
•
$OZD\VႋRSWKHXQLWZKHQRSHUDWLRQ
is delayed or when walking from one
location to another.
• Before setting the unit down, always
MAKE
SURE
the engine is off and all moving parts
have stopped.
• If you strike or become entangled with a
foreign object, stop the unit immediately
and check for damage.
DO NOT
operate
the unit before repairing damage.
DO NOT
operate the unit with loose or damaged
parts.
•
Unplug the unit for maintenance or
repair.
•
Use only original equipment
manufacturer (OEM) replacement parts
and accessories for this unit.
Use of any
other parts or accessories could lead to
serious injury to the user, or damage to the
unit, and void the warranty.
•
Keep the unit clean.
Carefully remove
vegetation and other debris that could
block moving parts.
•
7RUHGXFH¿UHKD]DUGNHHSDLUYHQWV
free from grass, leaves or excessive
grease.
•
,IWKHXQLWႋDUWVWRYLEUDWHDEQRUPDOO\
ႋRSWKHXQLWLPPHGLDWHO\
Inspect the unit
for the cause of the vibration. Vibration is
generally an indicator of trouble.
'RQRWSHUPLW¿QJHUVWRXFKWKHWHUPLQDOV
RISOXJZKHQLQႋDOOLQJRUUHPRYLQJWKH
extension cord from the plug.
ELECTRICAL SAFETY
WARNING!
1. Double insulated tools are equipped
with a polarized plug (one blade is
wider than the other and will require
the use of a polarized extension
cord.
7KH&KDLQ6DZ¶VSOXJZLOO¿WLQWR
a polarized extension cord only one
ZD\,IWKHSOXJGRHVQRW¿WIXOO\LQWRWKH
extension cord, reverse the plug. If the
SOXJVWLOOGRHVQRW¿WREWDLQDFRUUHFW
polarized extension cord. A polarized
extension cord will require the use of a
SRODUL]HGZDOORXWOHW7KLVSOXJZLOO¿WLQWR
the polarized wall outlet only one way.
,IWKHSOXJGRHVQRW¿WIXOO\LQWRWKHZDOO
outlet, reverse the plug. If the plug still
GRHVQRW¿WFRQWDFWDTXDOL¿HGOHFWULFLDQ
to install the proper outlet.
Do not
change or alter the equipment plug,
extension cord receptacle, or extension
cord plug in any way.
2. Double insulation eliminates the need
for the three-wire grounded power cord
and grounded power supply system.
Applicable only to Class II (double-
insulated) tools. This Chain Saw is a
double insulated tool.
Circuit Interrupter) protection should be
provided on all circuits or outlets to be
used for electric chain saws and lawn
and garden power tools. Receptacles are
available having built-in GFCI protection
and should be used for this measure of
protection.
WARNING!
• Double insulation DOES NOT take the
place of normal safety precautions when
operating this tool.
‡ *XDUGDJDLQႋHOHFWULFVKRFN3UHYHQW
body contact with grounded surfaces.
For example: metal pipes, wire fences.
3.
BEFORE
plugging in the tool,
BE SURE
that the outlet voltage supplied is within
the voltage marked on the tool’s data
plate.
DO NOT
use ‘AC only” rated tools
with a DC power supply.