Senix BLAX2-M, Operator'S Manual

Page: 11 / 54

WWW.SENIXTOOLS.COM 11 - EN
ASSEMBLY
1. Unpack all parts and lay them on a flat, stable surface:
2. Remove all packing materials and shipping devices, if
applicable.
3. The scope of delivery varies depending on the country
and purchased variant:
Model of BLAX2-M-0
• Blower x1
• Blower tube x1
• Instruction manual x1
4. If you find that parts are missing or show damage do
not use the product but contact your dealer. Using an
incomplete or damaged product represents a hazard to
people and property.
5. Ensure that you have all the accessories and tools
needed for assembly and operation. This also includes
suitable personal protective equipment.
NOTE:
BLAX2-M includes the charger and the battery pack.
BLAX2-M-0 does not include the charger and the battery
pack.
WARNING!
Wear protective gloves for this assembly work
and always lay the product on a flat and stable
surface while assembling.
Follow the assembly instructions step-by-step
and use the pictures provided as a visual guide
to easily assemble the product!
Do not insert the battery pack before the power
tool is completely assembled or adjusted!
INSTALLING THE BLOWER TUBE
WARNING!
To avoid serious personal injury and damage
to the unit, shut the unit off before removing or
installing an attachment.
Align and insert the blower tube. Make sure the blower
tube release button snaps into the slot on the blower tube
(Fig.2).
INSTALLING/REMOVING THE
BATTERY PACK
To install:
Align and slide the battery pack into the docking port until it
is locked in place (Fig.3).
To remove:
Press the unlock button on battery pack and remove the
battery pack from the product .
OPERATION
WARNING!
Inspect the tool for complete installation. Any
missing, damaged or misplace may cause
serious injury.
Wear protective equipments at all times while
operating the power tool.
SWITCHING ON/OFF
Hold the product as in working condition.
To start the product, either press the on/off switch to turn
the product on or dial the cruise control.
Dialing the cruise control clockwise locks the on/off switch
and keeps the machine at a constant speed.
To switch the product off, dial the cruise control
counterclockwise to the end can automatically release the
on/off switch and stop the product. If you starts the product
without using cruise control, just release the on/off switch
(Fig.4).
NOTE:
The product will continue to work for some time even after
the motor has been switched off! Wait until it comes to a
complete stop before putting the product down!
ADJUSTING BLOWING SPEED
Either press the on/off switch or dial the cruise control
clockwise can change the blower speed.
OPERATING HOURS
Only operate the product at reasonable hours - not early in
the morning, late at night or on weekends/ public holidays
when people might be disturbed. Inform yourself about local
restrictions.