Mount the bracket
The TABS
®
wall bracket can be mounted with screws or with Dual
Lock
®
fastener. Choose the method that is appropriate for your
particular environment. See
"A word about Dual Lock® fastener."
Mounting the bracket with screws:
You will need:
❏
level
❏
drill with
3
/
16
" bit
❏
hammer
❏
pencil
❏
Phillips screwdriver
1. Use the level to position the bracket straight on the mounting
surface. Be sure to leave enough room above the bracket for
removal of the monitor.
2. Use the bracket as a template and pencil in the screw hole
positions.
3. Drill the anchor holes with a
3
/
16
" bit.
4. Hammer in the plastic wall anchors until they are flush with the
mounting surface.
5. Align the holes in the bracket to the holes you have drilled and
attach the bracket using four of the 4 x 1" screws.
Mounting the bracket with Dual Lock
®
fastener
1. Clean the surface with rubbing alcohol and clean rag. Let it dry
thoroughly before beginning your installation. Use the level to
position the bracket straight on the mounting surface. Be sure to
leave enough room above the bracket for removal of the monitor
2. Peel off the film on the back of the 2
1
/
2
" piece of Dual Lock
®
fastener. Press the fastener firmly to the wall.
3. Line up the piece of Dual Lock
®
fastener on the headboard with
the two pieces on the bracket
(Figure 1)
. Fasten them together by
firmly pressing. You will hear a
"click" when the Dual Lock
®
fastener is properly mounted.
Figure 1
7
Recessed
areas
Dual Lock
®
fastener
