Step 1
267 Lowell Rd, Hudson NH 03051, USA | Phone: 1.888.328.7661 | Fax: 1.888.329.8328 |
www.sengenuity.com
Helping Customers Innovate, Improve & Grow
Step 1: Install and configure TempTrackr™ Wireless
Interrogation Software
Insert Interrogation Software CD into PC/Laptop drive. The
installation process should begin automatically. If this does not
happen, please access the CD drive using Windows Explorer and
double-click the “setup.exe” icon as shown in Figure 1.
Figure 2: Accessing the setup.exe icon via Windows Explorer
Step 1:
continued...
Please use the InstallShield Wizard, shown in Figure 2, to complete
the installation process. Successful installation will result in the
creation of a directory called TempTrackr in the path C:\Program
Files\Sengenuity\TempTrackr.
Start the Software from the Windows Start Menu or by double-
clicking the WSR-T2 icon from the directory in which the software
has been installed.
Figure 1: InstallShield Window for TempTrackr™
Step 1:
continued...
The software will apply regulatory restrictions based on your
geographic region. The FCC complaint version of the kit will
include software that conforms to FCC requirements. The CE
compliant version of the kit will include software that conforms to
CE requirements:
FCC requirements impose the following restrictions on the
•
reader:
The reader will read sensors only once every 30s.
•
The reader will only make use of one antenna. The other
•
two antenna ports are deactivated on FCC compliant
readers.
CE requirements restrict the reader to only operate in the 433
•
MHz ISM-Band. This means that you will only be able to read
one sensor with a CE compliant reader.
Figure 3: Regional setting for regulatory compliance
