Seneca S6001-RTU, User Manual

Page: 140 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
140
Since this is the digital output used
to monitor remote connection, its
value (“Remote connection active”)
cannot be changed.
Output 2 Mode This parameter represents the
operating mode of the Digital
Output 2 (DO 2).
Possible
modes are: “General
output” | “Remote toggle”
21
.
General output
Input/Output 1 Mode This parameter represents the
operating mode of the Digital
Input/Output 1 (first configurable
digital I/O) (DIDO 1).
Since this is used as an input for
“Remote
Connection Disable”
feature, its value (“Remote
connection disable”) cannot be
changed.
Remote connection disable
Input/Output 2 Mode This parameter represents the
operating mode of the Digital
Input/Output 2 (second configurable
digital I/O) (DIDO 2).
Possible modes are: “General input”
| “General output” | “Local alarm”. General output
Service Disable This parameter determines which
access services are disabled when
“Remote Connection Disable” digital
input is HIGH.
Possible
values are: “VPN
Connection” | “VPN Service” |
“Internet Connection” | “SMS
Service”.
See chapter 13, for a detailed
description of these values.
VPN Connection
The “Digital I/O Status” section of the page gives the current status values (“LOW”/”HIGH”) for each of the
four available digital I/Os.
18.1.14 I/O View (S6001-RTU)
In S6001-RTU CPU, one more page is available called “I/O View”; in this page, the current status of all the
inputs/outputs is shown, along with some diagnostic information.
21
“Remote toggle” function is still to be defined.