Access to the programming menu.
Access to the Quick Alarm Menu
If
FunC=0
has been set, it switches to the frequency
display (except 11-digit model)
If
FunC=0
has been set, it switches to the totalizer
display (except for the 11-digit model)
Held alarm reset
Totalizer reset (if this function has been enabled by
setting
rER=0
and reset of the alarms on the totalizer
CONTACT INFORMATION
Technical support
Product information
This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised.
The content of this document corresponds to the described products and technologies.
Stated data may be modified or supplemented for technical and/or sales purposes.
8/8
PARAMETERS TO SET FROM THE MENU:
t..t. .
Parameter code
Parameter name
SETTING RANGE AND DESCRIPTION
DEFAULT VALUE
rAt
Totalizer ratio
Sets a value by which to divide the totalizer. Permitted values:
1- 9999.
1
dP_t
Decimal point position
in the totalizer display
0 = no decimal point (e.g. 123456)
1 = first digit (e.g. 12345.6)
2 = second digit (e.g. 1234.56)
......
N digits display - 1
For 11-digit models (4+7): max number of decimal places equal to 6.
0: No decimal point
e.H..t
Confirming with OK/MENU you save all parameters on a flash card and, after a few moments, reset the module.
SUMMARY OF BUTTON ACTIONS (in display mode)
Below is a summary of the actions that can be performed from the button starting from the display phase (not
programming). In order for the actions to be carried out, the pressure on the buttons must last a few seconds.
ERROR REPORTING
Any errors are also shown directly on the display.
Below are the possible warnings with their meaning.
0000
: Frequency measurement value to be displayed > Hi-d value by 2.5% or if the frequency measurement value to be displayed
is > maximum that can be displayed.
EErr
: It can signal an error of the calibration memory at startup.
The operation of the instrument is blocked while ModBus communication is available (if optional board).
ORDER CODES
CODE
DESCRIPTION
MODEL:
S311
Indicator - totalizer with universal digital input.
DISPLAY
4
4 digits
6
6 digits
8
8 digits
11
4 + 7 digits
POWER SUPPLY
H
85 ÷ 265 Vac
L
10 ÷ 40 Vdc, 19 ÷ 28 Vac
OPTIONS
O
Optional board: RS485 Modbus port, 2 relay alarms and auxiliary digital input.
Insulation: 1500 Vac between each port.
T
Calibration and configuration service
