MODULE LAYOUT
2/3
TECHNICAL SPECIFICATIONS
CONSTRUCTION
Sensor directly COSTAMPED on the extension cable
INSULATION
100 MOhm to 100 Vcc.
CABLE LENGTH
1.5 m (including sensor length)
SENSOR DIMENSIONS
20 x 5 mm
ELEMENT
SENSITIVE
10 KOhm ±1% @ 25°C
ß (25/85) = 3977±0,75%
TEMPERATURE
OPERATIONAL
-50..105°C (in the air)
Thermoplastic cable, length: 1.5 m
PRELIMINARY WARNINGS
The word
WARNING
preceded by the symbol
indicates conditions or actions that put the user's safety at risk.
The word
ATTENTION
preceded by the symbol
indicates conditions or actions that might damage the instru-
ment or the connected equipment.
The warranty shall become null and void in the event of improper use or tampering with the module or devices
supplied by the manufacturer as necessary for its correct operation, and if the instructions contained in this manu
-
al are not followed.
WARNING
: The full content of this manual must be read before any operation.
The module must only be used by qualified electricians.
Specific documentation is available at www.seneca.it/ntc-150
Important: Obstructing ventilation slots with any object is prohibited.
Installing the module next to devices that generate heat is prohibited.
Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling).
The symbol on the product or its packaging shows the product must be surrendered to a collection centre authorized
to recycle electrical and electronic waste.
The module must be repaired and damaged parts replaced by the Manufacturer.
The product is sensitive to electrostatic discharges. Take appropriate measures during any operation.
