ENGLISH 6/8
MI004323-E
The MyALARM2 has 14 terminals in
the internal part of case. To use these
terminals, lift and remove the cover
placed in the inferior part of
MyALARM2.
In the figure on the side, the cover has
been removed.
The MyALARM2 has a SD card plug in
that can be used for data logging and
updating MyALARM2 firmware. The
micro SD card plug in is placed in the
lateral right side of the case.
To insert the SD card in the
corresponding connector, ensure that
the card is oriented with metal contacts
towards the left (with reference to the
figure).
The MyALARM2 has a SIM plug in,
placed in the lateral right side of the
case.
To insert the SIM card in the
corresponding connector, ensure that
the card is oriented with metal contacts
towards the left (with reference to the
figure).
Terminals
IMPORTANT: it is forbidden the mobile
cabling; conveying the cables
correctly. To place with order and
safety the cables outwards from the
terminals, use the four
removable
cable runways
at the rear of the case.
When wiring is completed, replace the
cover to protect cables from accidental
contact.
1 2 3
4 5 6 7 8 9 10 11 12
-
+
Micro SD
card
SIM card
SIM
card
SD
card
