Seneca B-ALARM, Installation Manual

Page: 8 / 8

ENGLISH - 8 / 8
t
Technical support support@seneca.it
Product Informations sales@seneca.it
CONTACTS
ORDER CODES
Code Description
ALIM-MY2
Power supply 12V 1000 mA
C
FD01 Photodiode-detector for pulse counting 10 Hz max (PULSCAP input).
A-GSM
GSM butterfly adhesive antenna, 3.0 m cable
The SMS you must send to obtain the remaining credit from the mobile operator is determined by the SIM:
Contract SIM cards: You must contact your mobile operator.
SIM from any mobile operators: use the Easy Setup configuration software
(downloadable for free from: www.seneca.it in the easy software products section)
SIM CARD REMAINIG CREDIT
LIST OF SMS EXECUTABLE COMMANDS
COMMAND SINTAX EXAMPLE
ADDCLK: Adds or subtracts an offset in
seconds to the internal clock
ADDCLK = <offset_seconds>
ADDCLK = +3600
ADDCLK= - 1522
AL : Shows the configuration
of input alarm
AL?
ALCOUNT: Shows the configuration
of counter alarm
ALCOUNT?
ALCOUNTDIS: Disables
the counter alarm
ALCOUNTDIS = <chn> ALCOUNTDIS = 1
LIST OF EXECUTABLE COMMANDS BY A RING, EVENT OR FAST COMMAND
The Easy Setup software allows you to program the B-Alarm. The reception by the device of a phone ring or
a particular event or a fast command causes the execution of one of the following commands:
COUNTER RESET
DISABLES PHONE-RING COMMAND
ENABLES PHONE-RING COMMAND
ENABLES TIMER 1, 2, 3, 4
DISABLES TIMER
1, 2
DISABLES POSTPONED COMMAND
ENABLES POSTPONED COMMAND
Using the Easy Setup software, all the previous commands can be combined with a fast command.
CLOSES THE OUTPUT
CLOSES THE TIMED OUTPUT
OPENS THE OUTPUT
OPENS THE TIMED OUTPUT
ENABLES ALARM IF INPUT IS CLOSED
ENABLES ALARM IF INPUT IS OPEN
DISABLES THE INPUT ALARM
CHANGES THE OUTPUT STATUS
REMAINING CREDIT REQUEST
INPUT ALARM STATUS REQUEST
COUNTER VALUE REQUEST
TOTALIZER VALUE REQUEST
INPUT STATUS REQUEST
B-Alarm STATUS REQUEST
BATT-GP80 Replacement battery