ENGLISH -
3
/
8
t
THE FIRST CONFIGURATION
The
device
turns
on
when
you
connect
the
device
terminals
(Power
supply
+
and
-).
To
switch
off
the
module,
remove
power
supply
from
+
and-
terminals
socket
and
hold
the
OFF
button,
near
the
GSM
antenna
socket,
for
at
least
6
seconds.
PROCEDURE TO TURN THE DEVICE ON AND OFF
The device can be
installed
on a wall or on
a
IEC
EN 60715
DIN rail
.
Never place this device inside
shielded
framework
and
near heat sources.
IEC EN 60175 DIN RAIL FIXING
INSTALLATION RULES
TOP
TOP
DIN RAIL
IEC EN 60715
SIM
CARD
ANTENNA
OFF
The metal contacts
of the SIM card are
on the underside
SIM
CARD
ANTENNA
OFF
È
SIM Card
Before inserting the SIM-CARD into the B-Alarm slot,
, you must:
using a smart-phone
-
activate the SIM or ensure the SIM has already been activated
- make sure that there are no SMS messages stored in the SIM
- make sure that the SIM remaining credit is sufficient
- disable the PIN.
Switching the device on for the first time, please follow these operations in the order
stated:
1 Make sure that B-Alarm is switched OFF and without power supply.
2
Connect the antenna.
3 Insert the SIM card.
The figure show the correct orientation of the SIM card.
s
4
to a power supply
Connect the device terminals (Power and -)
and
provide power.
5
The green LED blink slowly and the yellow Led blink quickly because the device
s
s
ies t
tr
o connect to the GSM network.
6
When theYellow LED blink slowly the device is connected to the GSM network.
7
number of
With the mobile phone you want to use as remote control,
call the
the
SIM (the calling duration must be at least one phone ringing tone
B-Alarm
and anonymous phone numbers are not allowed).
8
If the COMMANDS phonebook is empty then the mobile phone number is saved
,
in
s
both B-Alarm phonebooks: the COMMANDS and theALARMS phonebook .
9
When the green LED
then B-Alarm is ready to use.
comes on with a fixed light,
B-ALARM
Basic Alarm unit: SMS, 1Dl, 1DO, backup battery
32.2 mm
53.3 mm
90,0 mm
Weight
: 120g
