![SENDO 8E30-00000-000 series Manual Download Page 23](http://html1.mh-extra.com/html/sendo/8e30-00000-000-series/8e30-00000-000-series_manual_1239352023.webp)
[
[
[
]
]
]
19
P
e
rsonaliz
e y
o
ur
pho
n
e
6
2
Remove the battery - press down on the
tab at the centre of the bottom edge of the
battery and lift out.
3
Remove the top part of the rear cover -
press down on the area in the middle of
the cover, slide the cover up and lift off.
4
Pull on the two tabs near the bottom of the
phone at the same time, and press down.
The bottom of the cover should now stand
clear of the phone slightly.
5
Gently but firmly pull the bottom of the
cover away from the phone, as illustrated
below.
6
Separate the front cover, keypad and
phone and place the keypad into the new
cover.
>
Note:
If you want to clean the inside of
your cover, use a clean, soft, dry cloth.
You should carefully blow off any
remaining dust before replacing the
cover.
7
To replace the front cover, place the top of
the cover onto the phone and then press
the bottom of the cover and the phone
together (making sure the two tabs at the
bottom of the cover are aligned correctly