CREATING FEATURES AND SWITCHING BETWEEN MOD
ES
We recommend that you work through all the different modes described below in the order shown. If you need help please
email
CREATING THE USING THE JOINING PLATE TO JOIN TABLETOPS
**BALANCE BIKES ONLY OR VERY SMALL PEDAL BIKES** You must test each bike before use.
Both wheels (of the bike being used) MUST be on the Tabletop surface of the Seesaw BEFORE the Seesaw tips. If the Seesaw tips
before the rear wheel is on the ramp the bike will stop dead!
Take the Tabletop with the Skate Plate Slots and place this so the Joining Plate is at the opposite end from the Joining Plate. Take
3 x M10 x 35 mm Countersink bolts and place these through the surface to catch the T Nuts in the Joining Plate below. This must
be done by finger first to avoid cross threading.
Once all three bolts are in place tighten them with the 6 mm Allen Key until the bolts are flush with the surface. Secure to 12Nm
with a Torque Wrench if you have one and want to confirm maximum security.
Take the second Tabletop section with SKILL / PLAY STATION text and sit this onto the Joining Plate. Repeat the process above
for locating the bolts and applying the correct amount of force to hold the Tabletop safely in place.
You have now created the Balance Bike Seesaw and joined the two 600 mm Tabletops together to create one 1200 Long
Tabletop.
CHECK ALL BOLTS BEFORE USE!