The example below shows a Rookie / Skill Station 350 to 250 and Rookie / Skill Station 350 to 200 DECLINE DROP OFF! You can
also make an INCLINE DROP OFF by setting your ROOKIE Ramp at 200 mm high and the Skill Station at 350 mm HIGH! You may
wish to place a ramp at the end of the drop for first attempts. A second Rookie is PERFECT for this scenario and makes practice
much safer.
CREATING A 200 mm HIGH ROLL OVER
Or SAFE JUMP with EASY or STEEPER ANGLE LANDING
Using your ROOKIE you can create the same set up described below at 200 / 250 / 200 / 350 Height Settings!
Sometimes it is safer to Jump with a Back Board so there is NO DROP at the end of the ramp. You can quickly detach the Height
adjuster to create this feature with a 1200 long landing / roll. When the Ramp is in 200 Mode please make sure that the Joining
Plate is correctly orientated so that you have a supported surface that connects with the ground.
You can quickly create a steeper Roll Over or Safe Jump Board by removing unbolting the Lower Section above the join as shown
below. This gives a 600 mm long board and steeper back board! This gives a 600 mm long Back Board. Above 250 mm you must
be careful that the 600 mm Board does not create such a steep angle “A” that the chain ring hangs up on the LIP!