14
General
No power or no sound.
Car's engine switch is not on.
Turn your car's key to ACC or ON.
Cable is not correctly connected.
Check connection.
Fuse is burnt.
Replace fuse.
Check volume or mute on / off.
If the above solutions cannot help.
Press the RESET button.
Radio
Noise in broadcasts.
Station is too far, or signals are too weak.
Select other stations of higher signal level.
Preset station lost.
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Troubleshooting
I f y o u s u s p e c t s o m e t h i n g i s w r o n g ,
immediately switch power off. Do not use the
unit in abnormal condition, for example without
sound, or with smoke or foul smell, can cause
fire or electric shock. Immediately stop using
it and call the store where you purchased it.
Never try to repair the unit yourself because it
is dangerous to do so.
Installing the panel
• Hold the panel and ensure the panel faces
dwonward, and at an angle set one side
of the panel in the panel bracket.Press the
other side of the panel until it locks.
Anti-Theft System
Removing the unit
• Remove the panel and the trim plate.
• Insert both T-Keys into holes on the front
of the set until they lock.
• Pull out the unit.
• Turn the panel from horizontal to vertical,
push until it locks.
Disc
Disc is inside but no sound.
Disc is upside down.
Place disc in the correct direction, and the
label side up.
Disc is dirty or damaged.
Clean disc or change another disc.
Disc sound skips, tone quality is low.
Disc is dirty or damaged.
Clean CD or change another CD.
Sound skips due to vibration.
Mounting angle is over 30
o
.
Adjust mounting angle to less than 30
o
.
Unstable mounting.
Mount the unit securely with the mounting
parts.
1
1
2
2
1
1
2
2
1
1
2
2
