13
Installation Procedures
Carefully complete the electrical connections.
Check connections before operation.
Reset
Press “
” to flip down the panel. Then
press the “
RESET
” hole with a pointed object
to reset the unit to restore the system to the
original factory settings.
Installation Opening
This unit can be installed in any dashboard
with a suitable 183 mm ( W) x 52 mm ( H )
opening as shown below. The dashboard
should be 4.75 mm - 5.56 mm thick in order to
be able to support the unit.
Mounting bolt
rubber cushion.
1
2
3
Installation Guide
Important: Remove these two screws
before installation. Otherwise, the player will
not work.
1
Insert mounting collar into the dashboard,
and bend the mounting tabs out with a
screwdriver. Make sure that lock lever
is flush with the mounting collar ( not
projecting outward).
2
Secure the rear of the unit.
After fixing mounting bolt and power
connector, fix the rear of the unit to the car
body by rubber cushion.
3
Insert trim plate.
Anti-Theft System
This unit is designed with a flip-down
detachable panel.
The panel can be detached and taken with
you, helping to deter theft.
Removing the panel
• Switch off the power of the unit.
• Press to flip down the panel.
• Hold right side of the panel, slightly push it
to the left side, then pull it out.
• Place the panel into the case and take it
with you when you leave the car.
Reset
1
1
2
2
1
1
2
2