11
TA VOL
Rotate the knob to adjust TA volume.
RETUNE mode
RETUNE mode: Rotate the knob to choose
RETUNE-S or RETUNE-L.
RETUNE-S or RETUNE-L is time length
selection of TA SEEK retune interval.
RETUNE-S: short, TA SEEK retune interval is
45 seconds.
RETUNE-L: long, TA SEEK retune interval is
180 seconds.
Remark: RETUNE mode functions for TA
during TA SEEK mode only.
DSP mode
Rotate the knob to choose DSP sound effect:
POP - ROCK - CLASSIC - FLAT - DSP OFF
LOCAL/DX mode
Rotate the knob to choose tuner sensitivity
local or distant.
BEEP ON/OFF mode
Rotate the knob to choose button beep sound
on or off.
STEREO/MONO mode
Rotate the knob to choose FM stereo or mono.
VOL LAST/ADJUST mode
Press MENU button to choose VOL LAST,
the turn-on volume level is the volume level of
latest power off.
Rotate knob to choose VOL ADJ, then rotate
the knob to set the turn-on volume level.
WOOF ON/OFF mode
Rotate the knob to choose Sub-woofer on or
off.
LOUD mode
Rotate the knob to choose loudness on or off.
SEEK 1 / 2 mode
SEEK 1: Searching station will stop when the
next station is received.
SEEK 2: Searching station will stop when
or button is released and next station is
received.
12/24 HOUR SET mode
Press MENU button to enter 12/24 hour set
mode, rotate the knob to select 12 or 24 hour
mode.
Press the MENU button more than 2 seconds
to enter menu mode, then each press changes
the mode, rotate the VOL knob to adjust.
TA mode
Rotate the knob to choose TA ALARM or TA
SEEK mode.
If the TA (traffic Announcements)is turned on
and there is no traffic program identification
code received in the specified time, no TA/
TP will display and either TA ALARM or TA
SEEK will be activated.
TA ALARM mode : Alarm is turned on.
TA SEEK mode: TA SEEK is automatically
activated.
MASK mode
Rotate the knob to choose MASK DPI or
MASK ALL mode.
In some cases, the AF function may be
influenced by some interference, examples
are signals with strong field but without the
RDS data.For this reason, the unit has two
options to avoid the above interference.
MASK DPI mode :
Only AF which has different program
identification is masked.
MASK ALL mode :
T h e A F w h i c h h a s d i f f e r e n t p r o g r a m
identification and NO RDS signal with high
field strength is masked.
Menu Function
