Sencore VB7880 User Manual Download

Page: 37 / 90

5.3.2.2

OTT — Details — Manifest (Option)

If Active Testing is enabled for the channel, the

Manifest

view shows health information on the overall

manifest file for the channel as well as for the manifest files for the individual profiles.

Channel:

The channel name defined by the user and linked to a URL in the

OTT — Setup

view. A bulb indicates the current status of the channel, i.e. the most severe profile
status.

Progress:

Channels will be analyzed sequentially, and the progress bar shows which channel
is currently being monitored and how analysis is progressing.

Profiles:

The number of profiles associated with a channel.

Profile status:

The channel health bar displays the current status for individual channel profiles.

Profiles are separated by vertical black lines.
Colors indicate profile alarm status:

•

Green: OK

•

Yellow: Warning

•

Orange: Error

•

Red: Major

•

Black: Fatal

VB7880 Advanced Content Extractor User’s Manual version 5.2

Summary of Contents for VB7880



























































































Search results

Summary of Contents for VB7880

Reviews:

Related manuals for VB7880

Brands by name

Popular brands

Sencore VB7880, User Manual

Search results

Summary of Contents for VB7880

Reviews:

Related manuals for VB7880

Brands by name

Popular brands