20
IRD Quick Installation Guide
V1.2-N
PIC-2.4-9
Click the sub-menu “ASI” in Outputs menu and it will show the ASI configuration item in the
right interface, where it is able to set the bit rate of ASI output as following:
PIC-2.4-10
After that, click “submit” button to confirm the configuration.
2.4.3.3 IP Out
Click the Sub-menu “IP” in “Outputs” menu and it will show the IP configuration interface,
containing the main parameter of output IP streams. There are two channels for output, you
are able to set both of them. At first, set the “Enable” label of the channel you need to switch
on. Then, modify the Dest IP Address, Dest Port and protocol to be same as the destination
device.
PIC-2.4-11
