17
IRD Quick Installation Guide
V1.2-N
-Step two
Get the accurate value of the satellite frequency, symbol rate and LNB frequency from
satellite program provider and input them to the corresponding tab. After configuration,
press submit button to take it into effect.
PIC-2.4-3
‐
Step three
After that, press the “Status” menu in the left area to refresh the receiving information to
check if the signal is locked.
PIC-2.4-4
2.4.2.2 ASI IN
When choosing the ASI signal as input, check the ASI siganl first to ensure a high-quality
source, then connect the ASI signal to the ASI interface on rear panel. The device will
search and lock it automatically. If succeed, the status will show “Lock” in green, otherwise it
shows “unlock” in red.
