MRD 7000
– User Manual
Page 23 (126)
Backup Input
File Input
MPEG/IP Stream 1
MPEG/IP Stream 2
ASI Port 1-4
RTMP Input 1
RTMP Input 2
SRT Input 1
SRT Input 2
Seamless RTP
HLS Input 1
HLS Input 2
Zixi Input 1
Zixi Input 2
Satellite Port 1-4
None
During failover operation this input will
become the active input. The catalyst for
what causes the unit to switch to this input
is configured in the following setting.
Switch On
Manual Only
TS Sync Loss
Decode Failure
Manual Only
: the unit will not switch inputs
automatically. The user must manually
switch inputs.
TS Sync Loss
: the MRD 7000 will switch
from the primary to the backup input if the
primary stream loses synchronization for
the duration of the Switchover Interval.
Decode Failure
: the unit will switch to the
backup input when it encounters decoding
errors on the primary input.
Restore On
Manual Only
Primary Input TS Restored
Backup Input TS Sync Loss
Decode Failure
Manual Only
: the unit will not restore to the
primary input automatically. The user must
manually switch inputs.
Primary Input TS Restored
: the MRD 7000
restores to primary when the Primary input
regains transport stream synchronization.
Backup Input TS Sync Loss
: the unit will
switch from backup to primary when the
backup stream loses synchronization for the
duration of the Switchover interval.
Decode Failure
: the unit restores to the
Primary Input when the Backup Input
experiences a decoding error.
