SMP100 User Guide
52
2. Go to
Service Configuration
. Bypass the input TS and drag it to output
Board3 [CI]
on the
right side. Then on the left side in
Board3 [CI] Port1
the processed TS is listed as an input
again.
3. Right-click a program in the output CI port to descramble this service by the CAM in Port 1.
[Descramble]
follows the service that is descrambled as a mark. To cancel the descrambling
process for the service, right-click it and click
Non-descramble
. Click
Apply
.
4. Drag the service that has been descrambled from input
Board3 [CI], Port1
to output port.
