SMP100 User Guide
11
3.2.4 Configuring Output
Embedded ASI Output
Use the following two ways to create output TS:
1. Drag TS to TS
Click an input TS; drag and drop it on an empty output TS. Click
Apply
. See the following Image.
2. Drag Programs to Programs
Right-click an output TS. Click
Add TS
to assign
Original Network ID
and
TS ID
for this new TS.
Click
OK
, then an empty TS is created.
Click a service in the input port, drag and drop it on
Program (0 Services)
in the output area.
Click
Apply
before next step.
Go to
Status > ASI [Embedded]
. Verify the output
Effective Bitrate
of this ASI port.
