Admin | Control card
Once the login is complete the desktop will appear.
To configure personalized login, launch the User Configuration application and add the appropriate
users.
Admin
: All rights
Expert
: As Admin, but not allowed to configure interface IP addresses.
Engineer
: As Engineer, but not allowed to add and remove flows in the system, only to change the
content.
Operator
: View only rights
Still as the Admin user launch the IP interfaces
application for the installed modules and
configure the IP addresses of the interfaces. For
the Data ports use the RX and TX checkboxes
to open the Receive and Transmit features
respectively.
Configuring an input
From the desktop launch the IP input application of the desired slot (indicated in the parenthesis on the
application name).
Once on the input application, expand the left side by clicking the arrow to access the menu for adding
new sources.
To add a new source define the incoming multicast/unicast address and hit Add.
The new source appears in the input list view, highlighted. It is now possible to make changes before
saving the changes to the system. Once saved the input analysis starts and indicates if the input is
available via the bitrate, CC counter and the RTP counter. If the input contains DVB services they will
be listed under services column.
