As for the input the output application the action buttons are located behind the expansion arrow on the left
hand side. So to add a new output, expend the left pane and select the source to be added. Use Service / TS /
RTP buttons to select the type of input presentation to be used.
Configuring an output
Select the source, fill
in the parameters and
hit Create Output
As for the input, the stream to be created will be listed, and changes can be done
before the output is saved and activated in the system. To make changes, select
the output and the edit dialog appears on the rigth hand side.
Save the changes, and the output will be activated.
Contact Sencore
Sencore ProCare
Tel: 605-978-4600
Mail: [email protected]
