Sencore DMG 3000, User Manual

Page: 193 / 306

DMG 3200/3100/3000 – User Manual
Page 193 (306)
The status found by clicking on the Port on the status and configuration page provides useful
information when configuring the VBI/VANC. Teletext, subtitling pages, WSS and VPS status is
given for VBI, SMPTE-2031 and OP-47.
8.2.5 Service Parameters
The following default parameters are available for service configuration. The Components tab of
the output card can also be used configure different PID values and components on each
output port.
Figure 8.10 – Service name configuration for Encoders
Service Name Service Name for the encoded stream.
Service ID Service ID for the encoded stream.
PMT PID Default PMT PID for the encoded stream.
Video PID Default Video PID for the encoded stream. Rage: 32-8190
PCR PID
Default PCR PID for the encoded stream. If PCR and video PID have the
same value, PCR is embedded with the video. Rage: 32-8190
PCR Interval PCR Interval for the encoded stream. Rage: 1-250ms.
PIP PID
Default PIP Video PID for the encoded stream. Rage: 32-8190. PCR is