Page | 16
Power Supply Connectors (PSU1, PSU2)
There are two power supply connectors located on the back of the AG 4800X/XS:
•
PSU1
— This connector is designated as the AC Connector for the first power supply.
•
PSU2
— This connector is designated as the AC Connector for the second power supply.
Where the connectors are located is dependent on the frame you are using.
For More Information on...
•
power supply locations in your AG 4800X/XS, refer to the section “
•
installing the
AG4800X-OPT-1
, refer to the section “
Installing a Frame Power Supply
Power Cable Connection
This section includes information for connecting the power cables for the AG 4800X/XS frame.
Warning Hazardous Voltages
— The safe operation of this product requires that a protective
earth connection be provided. This protective earth is provided by the grounding conductor in the
equipment's supply cord. To reduce the risk of electrical shock to operator and service personnel, this
ground conductor must be connected to an earthed ground.
Warning
— In some countries, it may be necessary to supply the correct mains supply cord. Use only
an approved IEC 320 C-13 type A/C line cord rated for a minimum 10A at 250V and certified for the
country of use.
To connect the power cables for an AG 4800X/XS
1.
Connect the cable’s female IEC connector to the frame socket marked
PS 1
.
2.
If the
Redundant Power Supply
option is installed, plug the second IEC connector into
PS 2
.
To Redundant Power Supply
To Main Power Supply
Each AC connector includes a PowerLock, which is designed to retain the power cable connector.
3.
Clip the PowerLock over the shoulder of the inserted AC cable end.
4.
Connect the supplied power cable’s three-prong male connector to an AC outlet.
C
A
U
T
IO
N
R
IS
K
OF
S
H
O
C
K
DO
NOT
O
P
E
N
1
0
0
-2
4
0
V
~
5
0
-6
0
H
z
6
0
0
W
!
OGX
-FR
C
A
U
T
IO
N
:
R
IS
K
OF
S
H
O
C
K
D
O
NOT
O
P
E
N
1
0
0
-2
4
0
V
~
5
0
-6
0
H
z
6
0
0
W
