Sencor SWD 130 User Manual Download Page 9

EN-7

Instructions and information about the handling of used packaging

Take the packaging material to a designated municipal waste facility.

Disposal of used electrical and electronic equipment

  This symbol on products or accompanying documentation means that 

used electric or electronic appliances must not be added to standard 
communal waste. For proper disposal and recycling, take these products 
to designated collection points. Or as an alternative in some European 
Union states or other European countries you may return your products to 
the local retailer when buying an equivalent new product.
Correct disposal of this product helps save valuable natural resources and 
prevents damage to the environment caused by improper waste disposal. 
Ask your local authorities or collection facility for more details.
In accordance with national regulations penalties may be imposed for the 
incorrect disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic devices, ask your retailer or supplier 
for the necessary information.

Disposal in other countries outside the European Union

This symbol is valid in the European Union. If you wish to dispose of this product, 
request the necessary information about the correct disposal method from the 
local council or from your retailer.

  Fast ČR, a.s. declares that SWD 130 conforms to the basic requirements 

and other relevant provisions of Directive 1999/5/ES. The device can be 
operated in the EU without restriction. The declaration of conformity is 
a part of the user's manual or can be found at the website www.sencor.eu. 

Changes in the text, design and technical specifications may change without prior 
notice and we reserve the right to make these changes.

Summary of Contents for SWD 130










Reviews: