EN-1
Product features
1. All control elements utilise touch technology. No mechanical buttons are
used. The product is characterised by its long lifetime. The design combines
simplicity with classic style. Pleasant music. Function for limiting undesirable
activation and noise.
2. The circuit design engineered by the LCH Dr. team from the USA is
a guarantee of stable operation enabling the use of the remote control at
a distance of up to 150 metres.
3. The transmitter has a waterproof and dustproof design with screws on the
surface.
An automatic shut off function against misuse is available.
4. This product utilises an original switch to standby technology, where the
power consumption of the chip is reduced (measured with a μA meter).
5. The battery compartment in the transmitter has an innovative patented
slide-in design and is compatible with CR 2032 button cell batteries. It is
environmentally friendly and energy efficient.
6. Its innovative superheterodyne learning code enable users to simply setup
the pairing mode.
7. Microprocessor-controlled receiver with a stable double-sided printed circuit
board.
8. Design with isolated high and low voltage for safe operation.
9. The product design, internal structures and printed circuit board designs are
protected by patents.
Installation
Test
Negative
Open the packaging, remove the battery insulation foil and close the battery
compartment.
Please make sure that the negative pole of the battery is facing upwards and the
positive pole of the battery downwards.
Sticking
on
Take out the supplied double-sided adhesive tape, remove the sticker from one
side and stick it correctly on to the bottom surface of the transmitter.
Summary of Contents for SWD 130
Page 2: ......
