Vacuum Cleaner
SVC 820BK
EN
EN-5
Turning the vacuum cleaner on/off
After connecting the vacuum cleaner to the electric power source, turn it on by pressing the button marked with
the symbol
. By pressing the button once again you turn the vacuum cleaner off .
Electronic and mechanical regulator of suction power
Electronic regulator of suction power
The button with symbol
also serves as the electronic control of the
suction power. By turning it left/ right you can adjust the vacuum cleaner
input and hence its suction output. The low level of suction power is
suitable for vacuuming upholstered furniture, curtains. The maximum level
of suction output is suitable for vacuuming fl oors and carpets.
Mechanic regulator of suction power
This regulator is positioned on the hose handle. The suction power can be
adjusted by moving the regulator up or down. This regulator can be used
in situations, when e.g. the carpet has been sucked into the fl oor brush and
it is necessary to decrease the output.
Indicator for dust bag fullness
If the indicator for dust bag fullness is red, it may be due to:
A)
blocked, air, you should check the vacuum cleaner,
B) the dust bag is full, you should replace it with a new paper bag for
dust (for single use), or if you use a textile bag for dust (for repeated
use), then empty it.
Dust bag
Never use this vacuum cleaner without a dust bag. If the dust bag is
damaged, it is necessary to replace immediately. Clean the textile dust bag
routinely to increase its life.
Replacing the dust bag
Before changing the dust bag, turn the vacuum cleaner off with the main
switch and remove it from the electric socket.
1
Press the clamp on the vacuum cleaner cover and open it.
2
Remove the dust bag from the bracket.
3
Provided you use:
a) a paper bag for dust, replace it with a new one,
b) a textile bag for dust, remove the bag, empty it and re-insert
it in the bracket.
4
If the bag is positioned properly in the bracket, close the cover.
