Vacuum Cleaner
SVC 7PE
EN
EN-9
Copyright © 2017, Fast ČR, a.s.
Revision 01/2017
1) By pressing the clip and at the same time pulling it upwards open the vacuum cleaner filter area .
2) By pulling on the collar of the dust bag in the direction of the arrow, remove it from the plastic holder and
insert a new bag .
3) Close the lid of the vacuum cleaner, until you hear a click .
Changing and cleaning the outflow H.E.P.A. filter and the inflow micro-filter
F
1
2
3
4
5
6
1
Lid clip
2
Outflow H .E .P .A . filter
3
Grill of the inflow micro-filter
4
Grill of the inflow micro-filter
5
Inflow micro-filter
6
Outflow H .E .P .A . filter
1) By pressing the clip and at the same time pulling it upwards open the vacuum cleaner filter area .
2) By pulling on the collar of the dust bag in the direction of the arrow, remove it from the plastic holder to
make room for the removal of the filter .
3) Pull the inflow micro-filter grill towards yourself and take it out .
4) Pull to remove the outflow H .E .P .A . filter and take it out .
5) If the filters are slightly soiled it is possible to wash both of them under running lukewarm water . In the case
of heavy soiling replace it with a new one .
6) Place the outflow H .E .P .A . filter and the inflow micro-filter back into their position .
7) Return the dust bag .
8) Close the lid of the vacuum cleaner, until you hear a click .
Note:
Never insert the filters back into the vacuum cleaner if they are wet or damp! Always wait until they are
thoroughly dry .
Cleaning your vacuum cleaner
To clean the outside parts of the product use a fine cloth dipped in lukewarm water . Do not use aggressive
cleaning agents, paint thinners or solvents . Using these solutions could damage the surface of the product .
