EN
05/2019
Copyright © 2019, Fast ČR, a.s.
DESCRIPTION
8
Adjusting the suction strength
9
Telescopic tube
0
Floor
inlet nozzle
5
Dust
container
6
Hose
4
Winding button
3
Holder
2
Motor power
output control
1
Button
START / STOP
7
Holder
ASSEMBLY
Inserting the hose
6
into the air suction hole on the vacuum cleaner.
Press the safety button on the hose end and insert the hose end into the air suction hole on the vacuum
cleaner until you hear „click". The hose is now secured in correct position.
Place the holder
7
on the telescopic tube
9
Make sure to install the holder on the wider part of the telescopic tube.
Install the floor inlet nozzle
0
on the telescopic tube
9
Make sure to install the floor nozzle on the narrower part of the telescopic tube.
Adjust the length of the telescopic tube
9
as needed.
Adjust the length of the telescopic tube as follow: Move and hold the button on the tube forward as
shown by arrows and adjust the length of the tube as needed. Release the button and move the tube
little bit forward until you hear „click". The telescopic tube is now securely set in position.
USING YOUR VACUUM CLEANER
Connecting your vacuum cleaner to power source – wall outlet
Pull the plug of the supply cable from the vacuum cleaner until the desired length of the cable is out of
the appliance. Insert the plug to the wall outlet.
Vacuum cleaner
SVC 730RD / SVC 730GR
