Vacuum Cleaner
SVC 660SL / SVC 660RD
EN
EN-9
12/2014
Copyright © 2014, Fast ČR, a.s.
TROUBLESHOOTING
Before you decide to contact an authorized service centre, please read the following tips in the
troubleshooting chart:
Problem
Possible cause
Recommended action
The motor will not
start
–
The power cord is not connected
correctly to the wall power outlet.
– The wall power outlet is damaged.
–
The vacuum cleaner is not switched
on.
–
Insert the plug fi rmly into the
power socket
– Inspect the power socket
– Turn on the vacuum cleaner.
The suction output
is weak
– The dust bag is completely full.
– The vacuum cleaner is clogged.
– The fi lter is clogged.
– Change the dust bag
–
Remove the blockage or foreign
object
– Clean the fi lter.
The power cord is not
wound in completely.
The power cord may have slipped
down from the winding pulley
during winding.
Hold the cable under tension while
winding the cable.
The cable cannot be
pulled out.
The cable is wound up incorrectly.
Press the winding button of the self
winding cable and try to rewind the
power cord again
The output control
does not function.
The vacuum cleaner is out of order.
Have the vacuum cleaner repaired
(only by a qualifi ed technician)
The power cord starts
to wind in when it is
not required.
The winding mechanism is damaged.
Have the vacuum cleaner repaired
(only by a qualifi ed technician)
The vacuum cleaner
cover cannot be
closed.
The dust bag is not inserted, or is
inserted incorrectly.
Check the position of the dust bag
in the plastic holder, or insert a new
bag.
