EN-6
EN
Vacuum Cleaner
SVC 660SL / SVC 660RD
12/2014
Copyright © 2014, Fast ČR, a.s.
Caution:
Do not move the vacuum cleaner from place to place if the hose is in the parked position! You may
brake off the parking position holder!
Using your accessories
You may place the supplied narrow slot nozzle and cushion nozzle into the integrated accessory holder
attached to the hose.
•
The narrow slot nozzle may be used to vacuum in hard-to-reach spaces such as window frames,
libraries, upholstery corners, joints, etc. By turning the narrow slot nozzle brush a higher suction
power is achieved (suitable for example for vacuuming of hard to reach places on couches and
armchairs)
•
The cushion nozzle may be used for vacuuming of bed linens, upholstered furniture, etc.
Ending the vacuuming process
When you fi nish vacuuming, switch the vacuum cleaner off by pressing the START/STOP button and
then disconnect the power cord plug from the socket.
To wind the power cord back into the vacuum cleaner, press and hold the winding button with one
hand. Hold the cable with your other hand to protect the vacuum cleaner input area from damage.
Tip:
If the winding process stops and part of the power cord is still outside, release the winding button
and pull the cable out again by about 50 cm and press the winding button again and repeat the
winding process.
Carrying your vacuum cleaner
If you need to carry the vacuum cleaner, hold it only by the handle.
STORAGE OF VACUUM CLEANER
Before storage you may disassemble your vacuum cleaner into its individual parts or you may store
it assembled with the telescopic tube stored in one of the “parking“ positions (the rear or bottom
position).
