Vacuum Cleaner
SVC 610RD / SVC 611BL
EN
EN-9
Copyright © 2016, Fast ČR, a.s.
Revision 02/2016
Tip
use the brush slot nozzle to vacuum scratch-prone hard to reach places!
ending the vacuuming process
When you finish vacuuming, switch the vacuum cleaner off by pressing the start / stop button a
1
and then disconnect the power cord plug from the socket.
to wind the power cord back into the vacuum cleaner, press and hold the winding button a
7
with one
hand. hold the power cord with your other hand to protect the vacuum cleaner input area from damage
Tip
If the winding process stops and part of the power cord is still outside, release the winding button
a
7
and pull the power cord out again by about 50 cm and press the winding button a
7
again
and repeat the winding process.
Carrying the vacuum cleaner
you can use the handle a
9
to hold and carry the vacuum cleaner.
Caution:
Never attempt to carry the vacuum cleaner by holding the dust container handle a
5
!
sTorInG The vaCuum Cleaner anD aCCessorIes
Before storage, you may disassemble the vacuum cleaner into its individual parts or you may store it
assembled with the telescopic tube a
qa
stored in one of the "parking“ positions" (the rear or bottom
position).
CleanInG anD maInTenanCe
e
1
2
3
4
1
Dust container handle
2
Dust container clip
3
h.E.p.a. filter clip
4
h.E.p.a. filter
