Bagless Vacuum Cleaner
SVC 1030 (Cat & Dog)
EN
EN-9
2019
09/2019
1) Press the safety lock and pull the dust container handle up at the same time to remove the dust container
from the vacuum cleaner .
2) Place the dust container over a waste bin .
3) Press the safety clip of the bottom hatch on the dust container and the bottom hatch will open .
4) By turning in the anti-clockwise direction remove the plastic conical filter from the dust container, tip out the
dust and if necessary wash under running lukewarm water .
5) In the same way tip out the dust and dirt from the dust container into ordinary household waste . If the
container is heavily soiled you may wash the entire container under lukewarm running water . However,
before doing so, it is necessary to remove the H .E .P .A filter and its foam pre-filter from the container!
6) Then insert the plastic conical filter back into the dust container and lock in position by turning in the clockwise
direction .
7) Close the bottom hatch of the dust container . Make sure the safety clip clicks in .
8) Place the dust container back into the vacuum cleaner .
Caution:
Before replacing the dust container and the plastic conical filter back into the vacuum cleaner,
make sure that all parts are completely dry .
Replacing and cleaning the H.E.P.A. filter and the foam pre-filter
F
1
H .E .P .A . filter
2
Safety clip for the H .E .P .A . filter
G
1
Safety clip
2
Hinge for the H .E .P .A filter
frame
3
Hinge for the H .E .P .A filter
frame
4
Foam pre-filter
5
H .E .P .A . filter
