Bagless Vacuum Cleaner
SVC 1030 (Cat & Dog)
EN
EN-11
2019
09/2019
1) First remove the grill of the outflow filter by pulling upwards in the place of both safety clips .
2) Then remove the outflow filter and the foam pre-filter and replace them with new ones .
3) After reinserting both filters attach the cover and click in both clips .
Caution:
Make sure you put the outflow filter in the vacuum cleaner with the plastic grill facing outwards!
Cleaning your vacuum cleaner.
To clean the outside parts of the product use a fine cloth dipped in lukewarm water . Do not use aggressive
cleaning agents, paint thinners or solvents . Using these solutions could damage the surface of the product .
TROUBLESHOOTING
Before you decide to contact an authorized service centre, please read these following tips in the
troubleshooting chart:
Problem
Possible cause
Recommended action
The engine will not start
- The power cord is not firmly
inserted in the socket
- The wall power outlet is
damaged
- The vacuum cleaner is not
switched on
- Insert the plug firmly into the
power outlet
- Inspect the power outlet
- Turn the product on .
The suction output is insufficient
- The product is clogged
- The dust filter needs cleaning .
- The dust container is inserted
in the wrong position
- The filter is clogged
- Remove the blockage or foreign
object
- Clean the dust filter
- Close the dust container
- Clean the filter
The power cord is not wound in
completely
The power cord may have slipped
down from the winding pulley
during winding .
Hold the power cord during the
winding . Apply slight tension (by
pulling the power cord back) to
the power cord during the winding
process
The power cord cannot be pulled
out
The power cord is wound up
incorrectly
Press the winding button and try to
rewind the power cord again
The speed control is not working .
The product is out of order
Have the product repaired by a
technician .
(only by a qualified technician) .
The power cord starts to wind in
when you do not required .
The winding mechanism is out
of order
Have the product repaired by a
technician .
(only by a qualified technician) .
The dust container cannot be closed The dust filter is inserted
incorrectly or in an incorrect
position
Reinstall and secure the filter in
position and try again
