EN-6
EN
Bagless Vacuum Cleaner
SVC 1030 (Cat & Dog)
2019
09/2019
C
1
Handle
2
Vertical parking position
3
Front wheel mechanism
ASSEMBLY
Inserting the hose into the air suction socket on the vacuum cleaner:
Press the safety button on the hose end and insert the hose end into the air suction socket on the vacuum cleaner
until you hear "click" . The hose is now secured in the correct position .
Attach the holder to the telescopic tube:
Make sure to place the holder with the hose on the wider part of the telescopic tube .
Attach the floor inlet nozzle to the telescopic tube:
Make sure the floor nozzle is attached the narrower part of the telescopic tube .
Adjust the length of the telescopic tube:
Adjust the length of the telescopic tube as follows: Move and hold the button on the tube forward as shown the
by arrows and adjust the length of the tube as required . Release the button and move the tube slightly forward
until you hear a "click" . The telescopic tube is now securely fixed in position .
USING YOUR VACUUM CLEANER
Connecting your vacuum cleaner to the electrical power grid
Pull the plug attached to the power cord out from the vacuum cleaner until the desired length of the cord is out
of the product . Insert the plug into a power socket .
Caution:
Yellow marking on the power cord warns that the power cord is close to its end . Do not pull the
cord further than the red marking .
Adjusting the floor inlet nozzle according to the floor surface .
You may set the inlet nozzle according to the floor surface by adjusting the inlet flap:
•
If you want to vacuum carpets, close the bristles of the inlet inside the inlet nozzle, by turning the flap
accordingly .
•
If you want to vacuum hard and smooth surfaces, move the bristles out of the nozzle, by turning the flap
accordingly .
