04/2017
- 9 -
Copyright © 2017, Fast ČR, a.s.
5. While blending, you may add food or liquids to the blending jar
C3
through the
hole in the lid
C2
after removing the inner cap
C1
. Never open the outer lid
C2
during operation. When processing hot liquids, the inner cap
C1
must remain
closed.
6. In the event that food is sticking to the blade assembly
C5
or the walls of the
blending jar
C3
, turn the appliance off by turning the speed control knob
A12
to the 0 position (off) and disconnect it from the power socket. Make sure that
the blade assembly
C5
has stopped rotating. Carefully remove the blending jar
from the multi-function head
A8
. Take off the lid and using a plastic spatula,
clean the blade assembly
C5
and the inside of the blending jar
C3
. Put the lid
back on and reattach the blender assembly to the multi-function head
A8
. Plug
the power cord into a power socket and continue blending.
7. After you have finished using the appliance, set the speed control knob
A12
to
position 0 (off) and disconnect the power cord from the power socket. Check
that the blade assembly
C5
has stopped rotating and take the blending jar
assembly off the multi-function head
A8
. Use a soft plastic spatula to remove
food from the blending jar
C3
.
8. Clean out the individual parts after each use according to the instructions in
chapter Cleaning and maintenance.
ADVICE AND TIPS FOR BLENDING
■
First cut food with a firm consistency such as fruit and vegetables into smaller
pieces measuring 3 cm and only then blend it.
■
First, blend a smaller amount of ingredients and then gradually add more
ingredients through the hole in the lid
C2
while blending. In this way, you will
achieve better results than by adding all ingredients into the blending jar
C4
at once.
■
If you need to blend food of a solid consistency together with liquids, we
recommend that you first blend the food of solid consistency and a part of the
liquids. Then gradually add the remaining liquids through the hole in the lid
C2
while blending.
■
To blend very thick liquids, we recommend using the pulse level so that the
blade assembly
C5
does not get jammed too often. Start the blender repeatedly
in short intervals.
■
Ice cubes must be processed immediately upon being removed from the
freezer. When the ice starts to melt, the ice cubes will stick together and it will
not be possible to blend them.
QUICK GUIDE TO PROCESSING INGREDIENTS
Ingredients
Speed
selection
Recommended
blending time
Fruit and vegetables cut into smaller pieces
5–7
30 s
Baby food
5–7
40 s
Spreads, dressings and marinades
4–6
30 s
Smoothies and cocktails
6–10
40 s
Soups
6–10
30 s
Ice cubes
P (Pulse level)
Note:
The above food processing times are only a reference. The actual
blending time depends on the size of the ingredients, their amount and
the required final consistency.
CLEANING AND MAINTENANCE
■
Before cleaning the food processor, always switch it off by setting the speed
control knob
A12
to the 0 (off) position and disconnect it from the power
socket.
■
Disassemble the food processor into its individual parts. Wait until moving parts
come to a complete stop before disassembly.
■
Thoroughly wash the removable parts after every use using warm water with
a neutral dishwashing detergent. Then rinse using clean running water and
wipe dry with a fine wiping cloth. After washing and drying, we recommend to
coat the grinding blade
B6
and the grinding plates
B8
and
B9
with cooking oil.
■
If you whisked egg whites, first rinse the bowl
A4
and the beater
A2
under cold
water. If you were to use hot water, the egg white remains would harden and
their removal would be more difficult.
Attention:
When cleaning the grinding blade
B6
and the blending blade assembly
C5
, take special care to avoid injury.
■
The metal parts of the meat grinder and attachments
A1
–
A3
are not intended
for washing in a dishwasher. Other removable parts may be washed in
a dishwasher.
■
For cleaning the base unit
A5
and the multi-function head
A8
, use a cloth
lightly dipped in a weak detergent solution. Then wipe everything with a clean
dampened cloth and thoroughly wipe dry.
■
Do not submerge the food processor or its power cord in water or any other
liquids. For cleaning, do not use solvents, abrasive cleaning products, etc.
Otherwise the surface may be damaged.
STORAGE
■
If you will not be using the food processor, store it in a dry place out of
children’s reach. For storage, make sure that the multi-function head
A8
is tilted
down in the horizontal position.
TECHNICAL SPECIFICATIONS
Rated voltage range ......................................................................................................220−240 V
Rated frequency..................................................................................................................50/60 Hz
Rated power input .............................................................................................................. 1 000 W
Electrical shock protection class ..................................................................................................II
Noise level ............................................................................................................................ 85 dB(A)
The declared noise emission level of the appliance is 85 dB(A), which represents
a level A of acoustic power with respect to a reference acoustic power of 1 pW.
Explanation of technical terminology
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty insulation.
Changes to text and technical parameters are reserved.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your
municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling hand
over these appliances to determined collection points. Alternatively,
in some European Union states or other European countries you
may return your appliances to the local retailer when buying an
equivalent new appliance.
Correct disposal of this product helps save valuable natural
resources and prevents potential negative effects on the environment and human
health, which could result from improper waste disposal. Ask your local authorities
or collection facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or
supplier for the necessary information.
Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the
local council or from your retailer.
This product meets all the basic requirements of EU directives related
to it.
