04/2017
- 7 -
Copyright © 2017, Fast ČR, a.s.
EN
Food Processor
User's manual
■
Prior to using this appliance, please read the user’s manual thoroughly, even
in cases, when one has already familiarised themselves with previous use of
similar types of appliances. Only use the appliance in the manner described in
this user’s manual. Keep this user’s manual in a safe place where it can be easily
retrieved for future use.
■
We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty card
for at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we recommend that you pack the
appliance in the original box from the manufacturer.
DESCRIPTION OF THE FOOD PROCESSOR
A1
Kneading hook
A2
Balloon whisk
A3
A-shaped beater
A4
5.5-litre stainless steel bowl
A5
Base unit
A6
Removable cover of the front meat
grinder attachment hub
A7
Removable cover of the top
blender attachment hub
A8
Tilt-out multi-function head
A9
Bowl cover with a hole for adding
ingredients
A10
Hub for attaching attachments
A1
–
A3
A11
Multi-function head release lock
A12
Speed control knob
serves to set speeds 1 to 10, sets
the pulse level and turns off the
appliance.
A13
Suction cups
provide stability to the appliance
during operation.
DESCRIPTION OF MEAT GRINDER ACCESSORIES
B1
Pusher
B2
Hopper
B3
Feed tube
B4
Grinding chamber
B5
Screw shaft
B6
Grinding blade
B7
Screw ring
B8
Fine grinding plate
B9
Coarse grinding plate
B10
Separator
B11
Thin sausage stuffer attachment
B12
Thick sausage stuffer attachment
DESCRIPTION OF THE BLENDER ACCESSORIES
C1
Inner cap of the blending jar
C2
Outer lid of the blending jar with
a hole for adding ingredients
C3
Glass blending jar with 1.5 l
capacity
C4
Handle
C5
Blade assembly
is an integral part of the blending
jar.
BEFORE FIRST USE
1. Take the appliance and its accessories out of the packaging materials.
2. Thoroughly wash all accessory parts that are intended to come into contact
with food using warm water and a neutral kitchen detergent. Then rinse them
under clean running water and thoroughly wipe dry with a fine wiping cloth or
allow them to dry naturally. After washing and drying, we recommend to coat
the grinding blade
B6
and the grinding plates
B8
and
B9
with cooking oil.
3. Do not submerge the food processor or its power cord in water or any other
liquids.
Attention:
The metal parts of the meat grinder and attachments
A1
–
A3
are not
intended for washing in a dishwasher. Other removable parts may be
washed in a dishwasher.
BEATING, WHIPPING AND KNEADING
SELECTING ATTACHMENT TYPES
Attachment type
Purpose of use
Beater
A3
It is used for beating light and medium heavy yeast-free
doughs, for preparing sauces, creams, fillings, etc.
Do not
use it for kneading heavy doughs.
Balloon whisk
A2
It is used for whisking whole eggs or egg whites, whipped
cream, foamy creams, etc.
Do not use it for beating or
kneading doughs.
Kneading hook
A1
It is used for kneading various types of doughs including
heavy and thick doughs such as for example bread dough,
pizza dough, fresh pastry doughs, etc.
ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR
■
Before you start assembling or disassembling the food processor, check that it
is turned off and disconnected from the power socket.
1. Inserting the bowl
1.1 Place the food processor on an even, dry surface, for example on a kitchen
countertop.
1.2 Use the lock
A11
to release the multi-function head
A8
and tilt it out all the
way. The locked status of the multi-function head
A8
in the open position is
indicated by the lock
A11
returning to the default position.
1.3 Insert the stainless steel bowl
A4
into the base unit
A5
and secure it in place
by turning it clockwise. When the bowl
A4
is properly attached, it cannot be
separately lifted out of the base unit
A5
.
2. Mounting attachments and the cover
2.1 When attaching an attachment, the multi-function head
A8
must be locked
in the open position, see point 1.2 in the previous chapter. Attach one of the
attachments on to the shaft on the underside of the multi-function head
A8
so that the shaft fits into the hole on the attachment. Push the attachment
towards the multi-function head
A8
and turn it anticlockwise to secure it in
place. Lightly pull the attachment downwards with one hand to check that it is
properly attached.
2.2 Place the ingredients that you wish to process into the bowl
A4
. Release the lock
A11
and tilt the multi-function head
A8
to the horizontal position. After tilting
down the multi-function head
A8
, release the lock
A11
. The locked status of the
multi-function head
A8
in the tilted down work position is indicated by the lock
A11
returning to the default position. This is accompanied by an audible click.
2.3 Place the cover
A9
on to the bowl
A4
.
3. Disassembly
3.1 Remove the cover
A9
. Release the lock
A11
and tilt out the multi-function head
A8
all the way. After tilting out the multi-function head
A8
, release the lock
A11
.
Locking of the multi-function head
A8
in the open open position is indicated
by the lock
A11
returning to the default position, which is accompanied by an
audible click.
3.2 Push the attachment gently towards the multi-function head
8
. Then rotate it
clockwise until it is released from the shaft and take it off. Turn the bowl
A4
anticlockwise and remove it from the base unit
A5
. Move the arm
A8
back to
the horizontal position.
USING THE FOOD PROCESSOR
1. Select the right type of attachment based on its intended use and assemble
the appliance according to the instructions in the chapter Assembling and
disassembling the food processor. Put the ingredients into the bowl
A4
before
tilting the multi-function head
A8
to the horizontal position.
Attention:
In a single batch, it is possible to process no more than 2.2 litres of light
dough or 0.8 litres of thick, heavy dough. The maximum number of egg
whites that can be whisked at once is 12.
If an insufficient amount of ingredients are put in the bowl
A4
(less than
0.3 litres of dough), then they may not be perfectly processed.
2. Make sure that the speed control knob
A12
is set to position 0 (off) and that the
multi-function head
A8
is tilted down in the horizontal position. The cover
A7
must be properly attached to the multi-function head
A8
. Otherwise, the food
processor will not start. Connect the power cord to a power socket.
3. Set the required speed using the speed control knob
A12
. Gradually turn the
speed control knob
A12
clockwise to increase the speed, turning it in the
opposite direction will reduce the speed. To initially stir in the ingredients, first
set a lower speed and then adjust it as required. Electronic speed regulation
ensures that the set speed will be maintained under various loads. While it is
running, ingredients may be added into the bowl
A4
through the hole in the
cover
A9
.
4. The pulse mode is used for increasing the speed to maximum for a short time.
To activate the pulse mode, turn the speed control knob
A12
to the ”P” position
and to ensure continuous operation hold it down in this position. As soon as
you release the speed control knob
A12
, it will automatically return to position
0 (off).
5. If it is necessary to wipe ingredients off the inside of the mixing bowl
A4
and
the attachment, first turn off the food processor by setting the speed control
knob
A12
to position 0 (off) and then disconnect it from the power socket.
Wait until the rotating parts come to a stop and only then scrape away the
ingredients with a spatula.
6. After you have finished using the appliance, set the speed control knob
A12
to
position 0 (off) and disconnect the power cord from the power socket.
7. Wait until the rotating parts come to a stop and disassemble the food
processor according to the instructions included in chapter Assembling and
disassembling the food processor. Use a soft plastic spatula to empty out the
contents of the bowl
A4
.
8. Clean out the food processor after each use according to the instructions in
chapter Cleaning and maintenance.
