Sencor SSI 8407, User Manual

Page: 6 / 32

EN
Make sure not to scratch the ironing plate with metal object or scraping sponge.
Plastic parts should be cleaned with a cloth dipped in water and then dried thoroughly.
Do not use aggressive or abrasive cleaning solutions such as benzene or paint thinners.
STORAGE
After ironing, always set the steam regulator to the „0“ position - the minimum temperature.
Pull the supply cable plug from the wall outlet.
Open the reservoir lid (2). Tilt the iron to drain the water out of the reservoir. To completely empty the
reservoir, shake the iron little bit. - Close the reservoir lid (2).
Let the iron cool down.
Wind up the supply cable around the rear part of the iron.
Always place the iron in vertical position.
TIPS FOR HIGH QUALITY IRONING
Some tips to make your ironing easy
If you are ironing fabrics made from mixed materials (e.g. 40% wool, 60% synthetic material) ), set the
temperature according to the material that requires lower temperature.
If you do not know the type of fabric, test the temperature on the inside of the fabric. Start with lower
temperature and increase it gradually until you reach the ideal temperature.
Never iron surfaces with sweat, blood or other spots: the temperature cooks the spot in and you may not
be able to remove it later.
To prevent glossy look of synthetic, silk or cotton fabrics iron them on the inside only.
To prevent glossy look of velvet fabrics, iron them only in one direction (the fi bre direction) and do not press
hard on the iron.
The more clothing you wash in one load the more wrinkled the clothing comes out. Too wrinkled clothing
may be due to too high speed that is needed for the drying cycle.
Many materials can be iron easier if wet little bit (for example silk).
Technical specifi cation:
220-240 V~ 50/60 Hz, 1200-1400 W
Disposal of Used Electrical & Electronic Equipment
The meaning of the symbol on the product, its accessory or packaging indicates that this
product shall not be treated as household waste. Please, dispose of this equipment at your
applicable collection point for the recycling of electrical & electronic equipments waste. In the
European Union and Other European countries which there are separate collection systems for
used electrical and electronic product. By ensuring the correct disposal of this product, you
will help prevent potentially hazardous to the environment and to human health, which could
otherwise be caused by unsuitable waste handling of this product. The recycling of materials
will help conserve natural resources. Please do not therefore dispose of your old electrical
and electronic equipment with your household waste. For more detailed information about
recycling of this product, please contact your local city offi ce, your household waste disposal
service or the shop where you purchased the product.
This product is in compliance with the requirements of the regulations of EU on
electromagnetic compatibility and electrical safety.
Steam Iron
SSI 8407
EN - 6