- 7 -
07/2019
Copyright © 2019, Fast ČR, a.s.
EN
Robotic vacuum cleaner
User's manual
BEFORE FIRST USE
■
Prior to using this appliance, please read the user's manual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’s manual.
Keep this user's manual in a safe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user's manual.
■
We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
■
Carefully unpack the appliance and take care not to throw away any part of the
packaging before you find all the parts of the appliance.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1
Control panel
A2
Bumper bar with an anti-collision
sensor
A3
Main switch
A4
Power adapter connector socket
A5
Dust container
A6
2-in-1 mop unit
Consists of a water tank, dust
container and a mop fabric
A7
Container release latch
A8
Charging contacts
A9
Front swivel wheel
A10
Bottom anti-fall sensor, central
A11
Left rotary brush (L)
A12
Bottom anti-fall sensor, left
A13
Left motorised rubber wheel
A14
Bottom anti-fall sensor, right
A15
Right rotary brush (R)
A16
Right motorised rubber wheel
A17
Battery compartment cover
A18
Central rotary brush compartment
A19
Suction hole
A20
Central rotary brush cover
A21
Central rotary brush
B1
Power adapter
B2
Power adapter plug
B3
Power indicator
B4
Charging station
B5
Charging contacts
B6
Power adapter plug socket
C1
Remote control
C2
Display
C3
Scheduled cleaning setting mode
C4
Return to the charging station
button
C5
Forward button
C6
Left button
C7
Right button
C8
Reverse button
C9
Vacuum cleaner start / off button
C10
Cleaning mode selection button
C11
Time setting button
C12
Maximum cleaning mode in which
the vacuum cleaner cleans until the
battery is almost flat.
C13
Battery compartment cover
C14
Battery compartment
(2pcs AAA × 1.5V)
D1
Power button
D2
Wi-Fi indicator
D3
Battery power indicator
D4
360° panoramic camera
E1
Dust container
E2
Water tank
E3
Mop fabric
E4
Duster fastening velcro strips
E5
Filling opening cap
E6
Container contacts
F1
HEPA filter holder
F2
HEPA filter
Highly effective air-borne particle
filter able to capture even the finest
dust particles.
F3
Cleaning brush
G1
HEPA filter holder
G2
HEPA filter
Highly effective air-borne particle
filter able to capture even the finest
dust particles.
H1
Latches
H2
Rotary brush cover
H3
Rotary brush
H4
Brush bearings
I1
Magnetic tape
PURPOSE OF USE AND FEATURES OF THE ROBOTIC VACUUM
CLEANER
■
The robotic vacuum cleaner is intended for cleaning various types of hard floors
such as wooden or laminate floating floors, tiles, vinyl, etc. and carpets with a low
pile height. While vacuuming, it effectively combines various routes to optimally
clean the entire floor area.
■
The suction hole effectively removes hair, animal fur, etc. The two side rotary brushes
brush dirt out of hard-to-reach places along walls and furniture and out of corners.
The motorised rubber wheels protect sensitive floors against scratching and can
travel over threshold strips up to a height of 1 cm and ride on to a 2 cm high carpet.
■
The suspended bumper enables the vacuum cleaner to dampen the approach to an
obstacle and to efficiently clean around it. The infrared sensors in the front bumper
prevent the robotic vacuum cleaner from colliding with obstacles. Safe operation in
rooms with stairs is made possible by the bottom anti-stair-fall sensors.
■
Another advantage the a robotic vacuum cleaner is the mop function, which
enables dry and wet wiping of smooth hard floor surfaces. While wiping, the vacuum
cleaner vacuums small bits of dirt and dust from the floor to prevent the mop fabric
from being excessively soiled during the cleaning cycle. When the vacuum cleaner
finishes cleaning, it will automatically shut off the supply of water and thereby limit
it leaking on to the floor.
■
For easy identification of the operating state, the button on the cover has an
indicator light the colour of which indicates low battery voltage (lit red), battery
charging (flashing alternately red and blue), full charge and operation (lit blue).
Apart from the indicator lights, the vacuum cleaner also has audio signals and voice
messages that accompany certain functions or error states of the vacuum cleaner,
see chapter VOICE MESSAGES.
■
The remote control facilitates convenient control, enabling the vacuum cleaner
to be turned on and off, to be set to the automatic cleaning mode, to select an
operating mode, to send the robotic vacuum cleaner to the charging station or to
set scheduled cleaning.
■
The vacuum cleaner is equipped with a GYRO MAPPING function (orientation in
space) and a 360° panoramic camera with the help of which it is able to identify the
spacial geometry the room that it is cleaning. The vacuum cleaner thereby misses
no spots and cleans the floor more effectively. This is a built-in function and cannot
be affected in any way.
PREPARING THE ROBOTIC VACUUM CLEANER FOR OPERATION
INSTALLING AND USING THE ROTARY BRUSHES
■
The rotary brushes
A11
and
A15
are intended for smooth floor surfaces and ensure
effective cleaning in corners, along walls and furniture.
■
Turn the vacuum cleaner upside down. Gradually push the rotary brushes precisely
and with force on to the pins that are intended for them. While doing this, make sure
that the marks
L
and
R
both on the brushes and on the vacuum cleaner match. Turn
the vacuum cleaner back over to the operating position.
■
When using the vacuum cleaner to clean rooms with carpets, remove the rotary
brushes. When removing them, proceed in the reverse sequence to their installation.
INSERTING AND REMOVING THE BATTERY
■
The robotic vacuum cleaner is equipped with a Li-ion battery. If the battery is packed
separately, it is necessary insert it into the vacuum cleaner before first use. Use only
the original battery type.
■
Make sure that the vacuum cleaner is turned off with the main switch
A3
. Turn the
vacuum cleaner upside down and screw off the cover
A17
.
■
Remove the vacuum cleaner connector from the battery compartment. Connect the
battery connector to it. The battery can only be connected in one direction.
■
Screw the cover
A17
back on and turn the vacuum cleaner back over to the
operating position.
■
Remove the battery in reverse sequence. Prior to removing it, always check that the
vacuum cleaner is turned off using the main switch. The fabric strips on the body of
the battery make battery removal easier.
■
When the vacuum cleaner will not be used for an extended period of time, take out
the battery and store it in a dry, clean and cool place out of children's reach.
LOCATION OF THE CHARGING STATION
■
The charging station
B4
serves to automatically recharge the battery and the
vacuum cleaner must have good access to it.
■
Locate the charging station against a wall on a hard, even and dry surface within
reach of a power socket. Make sure that there are no stairs or obstacles within
a distance of 1 m on the left and right of the charging station and within a distance
of 2 m in front of the charging station, that would prevent the vacuum cleaner from
finding the charging station and docking successfully.
■
Insert the power adapter plug
B2
into socket
B6
of the charging station, and insert
the power cord plug into a power socket. Place the power cord in such a way that it
does not tangle into the cleaning brushes of the vacuum cleaner.
■
In the event that the vacuum cleaner is not used for an extended period of time,
disconnect the charging station from the power socket and store it in a dry, clean
and cool place.
CHARGING THE BATTERY FOR THE FIRST TIME
Note:
Prior to charging the battery, the vacuum cleaner must be turned on
using the main switch
A3
.
■
Before using the vacuum cleaner for the first time, it is necessary to fully charge the
battery for at least 5 hours.
■
Check that the charging station is correctly positioned and connected to a power
socket according to chapter Location of the charging station. Turn on the main
switch
A3
A3
of the vacuum cleaner, grasp the robotic vacuum cleaner and
manually place it into the charging station so that the charging contacts
A16
on
the underside of the vacuum cleaner and the charging contacts
B5
on the charging
station are connected. When the contacts are connected, the charging process will
start.
■
The vacuum cleaner can also be charged without using the charging station. Insert
the plug
B2
of the power adapter
B1
into socket
A4
of the vacuum cleaner, and
insert the power cord plug into a power socket.
■
During the charging process, the indicator light on button
D1
will alternately flash
blue and red.
■
When the battery is fully charged, the indicator light of button
D1
will remain
permanently lit blue and the process will end automatically. The vacuum cleaner
is now ready for use.
