EN-8
EN
Tower Fan
SFN 5040BL
Copyright ©
2021
, Fast
Č
R, a. s.
Revision
01/2021
FAN ASSEMBLY
Push the fan pole through the opening in the square base. Attach the nut on to the fan pole and
tighten in the clockwise direction. The nut must be fi rmly tightened to ensure that the fan does not fall
over during operation.
D
1
2
3
1
Fan
pole
2
Base
3
Screw
nut
BEFORE FIRST USE
•
Take the appliance and its accessories out of the packaging materials.
•
Assemble the fan according to the instructions included in chapter Fan Assembly.
•
Slide out the battery compartment from the remote control. Insert one 3V type CR2032 battery
according to the polarity shown on the rear side of the remote control. Slide the battery compart-
ment back into the remote control.
Note: Do not install the battery into the remote control if you will not be using it for an extended
period of time.
E
•
Connect the fan to a power socket. The connection a working power socket is confi rmed by a sound signal.
