- 7 -
05/2020
Copyright © 2020, Fast ČR, a.s.
EN
Air Cooler
User's manual
■
Prior to using this appliance, please read the user's manual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’s manual.
Keep this user's manual in a safe place where it can be easily retrieved for future use.
■
We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1
Remote control signal receiver
A2
Control panel with display
A3
Horizontal flaps with manually
adjustable tilt
A4
Air outlets
A5
Vertical flaps
A6
Water level indicator with MIN and
MAX marks
A7
Integrated handle
A8
Storage space for the remote
control
A9
Washable dust filter
A10
Washable water filter
A11
Power cord
A12
3-litre removable water tank
A13
Water tank lock
A14
Travel wheels
A15
Remote control
A16
Cooling insert (2 pcs)
DESCRIPTION OF THE CONTROL PANEL
B1
On/Off button
B2
Fan speed setting button
B3
Cooling / humidification mode
button
B4
Operating mode selection button
B5
Automatic shut-off timer button
B6
Flap motion button
B7
Fan speed setting indicator lights
B8
Cooling / dehumidification mode
indicator light
B9
Operating mode indicator lights
B10
Timer indicator lights
B11
Flap motion indicator light
DESCRIPTION OF THE REMOTE CONTROL
C1
On/Off button
C2
Flap motion button
C3
Operating mode selection button
C4
Cooling / humidification mode
button
C5
Timer button
C6
Fan speed setting button
BEFORE FIRST USE
■
Before first use, take the appliance and its accessories out of the packaging material
and remove all promotional labels and stickers. Check that neither the appliance nor
any of its parts is damaged.
INSERTING AND REPLACING BATTERIES IN THE REMOTE
CONTROL
■
From the underside side of the remote control
A15
, slide out the battery
compartment and insert a 3V CR2032 battery into it, see figure
D
. While inserting
the battery, maintain the correct polarity.
■
If the battery in the remote control
A15
is flat, replace it with a new battery of the
same type.
■
If you decide not to use the remote control
A15
for an extended period of time, we
recommend removing the battery. If the battery were to leak into the inner area of
the remote control
A15
, this could result in its damage.
Note:
Never put batteries in a fire, short circuit them or damage them in any
way. Dispose of them ecologically at the end of their lifetime. Never throw
batteries out with communal waste.
OPERATING THE APPLIANCE
Installation
■
Locate the appliance on an even, dry and stable surface within reach of a properly
grounded power socket.
■
To ensure sufficient air circulation, leave a clearance of at least 30 cm on all the sides
of the appliance.
■
Make sure that the appliance is properly assembled and connect it to a power
socket. The appliance will make a sound and switch to the stand-by mode. All
buttons except for the
B1
button will be disabled.
Turning the appliance on / off
■
Press the
B1
button to start the appliance. The appliance will beep and start
running in the default setting.
Default settings:
1) Fan mode set to the lowest speed. (When the appliance is started for the first
time, it will first run at medium speed for approximately 3 seconds and then
automatically switch to the low speed. If you turn on the appliance from stand-by
mode, it will again start at medium fan speed for approximately 3 seconds and then
automatically switch to the low speed, if this speed was set before it was turned off.)
2) Cooling mode is turned off.
3) Operating mode: NORMAL and the indicator light
is lit.
4 The timer is turned off.
5) Vertical flap motion is turned off.
■
To turn off the appliance, press button
B1
. The appliance will make a sound
and switch to the stand-by mode. When the appliance is turned off to the stand-by
mode, the previous settings are stored in memory. This does not, however, apply
when the appliance is disconnected from the power socket.
■
Always turn off the appliance and disconnect it from the power socket when you
have finished using it.
Setting the fan speed
■
Button
B2
serves to set the fan speed. Press button
B2
and select the
desired fan speed in the following order:
(low speed) -
(medium speed) -
(high speed). Each time it is pressed, the respective indicator light will be lit.
Setting the cooling / humidification mode
■
Button
B3
is used to turn the cooling/humidification mode on and off. Indicator
light
B8
is lit to indicate that the mode is activated. The pump will start running.
■
Before starting this mode, check that the water in the water tank
A12
is at least
at the minimum mark. To fill the water tank with water, proceed according to the
instructions contained in section "
FILLING THE WATER TANK
".
Note:
To prevent the pump from becoming damaged due to long term use, the
pump will automatically turn off after 10 hours of continuous operation in
the cooling / humidification mode.
Setting the automatic shut-off timer:
■
Button
B5
serves to turn on the timer. Repeatedly press button
B5
to
change the timer in the following order: 1H – 2H – 4H – 8H – off. Each time it is
pressed, the respective indicator light will be lit. If "off" is selected, no indicator light
will be lit. The automatic shut-off timer durations cannot be accumulated. When the
selected time elapses, the appliance will automatically switch to the stand-by mode.
Setting an operating mode
■
Button
B4
serves to set the operating mode. Repeatedly press button
B4
to select the operating mode in the following order:
(NORMAL = normal mode)
- (NATURAL = natural breeze) -
(SLEEP = sleep mode). Each time it is pressed,
the respective indicator light will be lit.
■
In the NORMAL operating mode, the fan speed is constant.
■
In the NATURAL operating mode, the air flow speed is controlled automatically
based on the selected flow speed. This achieves the natural breeze effect.
Progression of the mode when high fan speed is set
High speed
Medium
speed
Low speed
Fan stops
Progression of the mode when medium fan speed is set
High speed
Medium
speed
Low speed
Fan stops
Progression of the mode when low fan speed is set
High speed
Medium
speed
Low speed
Fan stops
