- 9 -
12/2019
Copyright © 2019, Fast ČR, a.s.
3. Dehumidification mode
■
Make sure that the flexible hose
B3
is disconnected from the air conditioner.
Repeatedly press button
MODE C3
until the dehumidification indicator is lit. It
is not possible to set the temperature or fan speed in this mode. The fan speed is
automatically set.
4. Automatic mode
■
In the automatic mode, the portable air conditioner will automatically set
the operating mode (cooling / fan / dehumidification) depending on the set
temperature and the temperature in the room. The portable air conditioner will
automatically control the temperature in the room based on the temperature that
you set. It is not possible to set the fan speed in the automatic mode.
■
Repeatedly press button
MODE C3
until the automatic mode indicator
is lit. In
the automatic mode both the automatic mode indicatoras well as the indicator of
the selected operating mode will be lit.
FUNCTIONS OF THE PORTABLE AIR CONDITIONER
1. Timer functions
■
While the portable air conditioner is turned on, press the
Timer C2
button. You will
enter the automatic shut-off mode and “TIMER OFF” will be shown on the display
C12
. Use the
–
/
+
buttons to set the desired duration. Press the
TIMER C2
button
within 5 seconds to enter the automatic start mode. “TIMER ON” will be shown on the
display
C12
. Use the
–
/
+
buttons to set the desired duration.
■
While the portable air conditioner is turned off, press the
TIMER C2
button and
use the
–
/
+
buttons to set the desired duration. Press the
TIMER C2
button within
5 seconds to enter the automatic shut-off mode. Use the
–
/
+
buttons to set the
desired duration.
■
The desired start / shut-off duration can be set in 30-minute increments (up to 10
hours) and in 1-hour increments (up to 24 hours). The portable air conditioner will
automatically countdown the set duration.
■
The portable air conditioner will automatically switch to the previously set
temperature if no button is pressed within 5 seconds.
■
If you need to turn off the timer, turn the portable air conditioner on or off, or
alternatively set the timer to 0 hours.
2. Sleep function
■
The sleep function is used to reduce overnight power consumption.
■
Press the
SLEEP C7
button. The temperature will increase by 1 °C within 30 minutes.
Within the next 30 minutes the temperature will increase by another 1 °C. The
portable air conditioner will maintain this new temperature for a further 7 hours. The
temperature setting will then return to the initially set temperature and the sleep
function will be automatically cancelled.
Note:
This function cannot be set in the fan and dehumidification modes.
3. Flap swing function
■
Press the
SWING C1
button to automatically start the swinging motion of the flap.
While the flap is swinging, press the
SWING C1
button again to stop the flap at
a certain angle.
Note:
When the portable air conditioner stops its operation, it will not be
possible to start it again for approximately 3 minutes. This is a standard
protection feature. It can be put back into operation after 3 minutes.
B. REMOTE CONTROL
Inserting and replacing batteries
■
Slide out the battery compartment cover, which is located on the rear side of the
remote control. Place two AAA/LR03 (2x 1.5V) alkaline batteries into the battery
compartment and close the cover.
■
When inserting the batteries ensure the correct polarity as shown in the battery
compartment.
■
When replacing the batteries, always use batteries of the same type, never combine
old and new batteries or batteries of various types.
Note:
Removing the batteries from the remote control will delete all the
settings. After new batteries are inserted the default remote control
settings as programmed by the manufacturer will be renewed.
If you will not be using the remote control for longer than 2 months,
remove the batteries.
Using the remote control
■
For the remote control to work correctly, ensure that the maximum distance of the
remote control from the portable air conditioner is not greater than 7 m and that
there is no obstacle between the remote control and the portable air conditioner
that could prevent the transmission of the signal.
■
Point the remote control directly at the portable air conditioner. The transmission of
the signal is confirmed by a short sound signal.
■
Do not expose the remote control to direct sunlight or high temperatures. Otherwise
the signal may not be transmitted.
Note:
Do not combine old and new batteries or batteries of various types.
Never put the batteries in a fire, short circuit them or damage them in
any way. Dispose of them ecologically at the end of their lifetime. Never
throw batteries out with communal waste.
Turning the portable air conditioner on and off
To turn on the portable air conditioner, press button
D2
once. Press button
D2
again to
turn the portable air conditioner off.
OPERATING MODES
1. Cooling mode
■
Repeatedly press button
MODE D3
until the cooling indicator
is lit. Using the
▲/▼
buttons, set the desired temperature. You can set the temperature in the range
from 17 to 30 °C.
■
Repeatedly press the
FAN
D5
button to set the fan speed: high speed – medium
speed – low speed – automatic speed.
■
Press button
D2
to turn the portable air conditioner on in the cooling mode.
2. Fan mode
■
Repeatedly press button
MODE
D3
until the fan mode indicator
is lit.
■
Repeatedly press the
FAN
D5
button to set the fan speed: high speed – medium
speed – low speed – automatic speed.
■
Press button
D2
to turn the portable air conditioner on in the fan mode.
■
Note
: In the fan mode, it is not possible to set the temperature, therefore no
temperature information will be shown on the display
D1
.
3. Dehumidification mode
■
Repeatedly press button
MODE
D3
until the dehumidification indicator is lit.
■
It is not possible to set the temperature or fan speed in this mode. The fan speed is
automatically set.
■
Press button
D2
to turn the portable air conditioner on in the dehumidification
mode.
4. Automatic mode
■
If you select an automatic mode, the portable air conditioner will automatically
select an operating mode based on the temperature in the room.
■
Repeatedly press button
MODE
D3
until the automatic mode indicator
is lit.
■
Press button
D2
to turn the portable air conditioner on in the automatic mode.
FUNCTIONS OF THE PORTABLE AIR CONDITIONER
1. Automatic start and shut-off function
Automatic start
■
The automatic start function makes it possible to set a time after which the portable
air conditioner will start automatically.
■
Press the
TIMER ON D10
button. The last set time and “h” (hours) will start flashing
on the display
D1
.
■
Repeatedly press the
TIMER ON D10
button and set the time in hours after which
the portable air conditioner will turn on automatically. The digits on the display
D1
represent the time in hours.
■
Wait approximately 2 seconds and the automatic start function will be activated. The
set temperature is then shown on the then display
D1
.
Automatic shut-off
■
The automatic shut-off function makes it possible to set a time after which the
portable air conditioner will shut off automatically.
■
Press the
TIMER OFF D9
button. The last set time and “h” (hours) will start flashing
on the display
D1
.
■
Repeatedly press the
TIMER OFF D9
button and set the time in hours after which
the portable air conditioner will turn off automatically. The digits on the display
D1
represent the time in hours.
■
Wait approximately 2 seconds and the automatic start function will be activated. The
set temperature is then shown on the then display
D1
.
Note:
The automatic shut-off or start time can be set in the range between 30
minutes and 24 hours (set in 30 minute intervals until 10 hours, and one
hour intervals until 24 hours).
In the event that you need to cancel the automatic shut-off or start function, set the
time to “0.0”.
Setting automatic start and shut-off at the same time
■
When setting the automatic start and shut-off, it is necessary to take into
consideration the current time since the start and shut-off time will be counted
down from it.
■
Press the
TIMER ON D10
button. The last set time and “h” (hours) will start flashing
on the display
D1
. Repeatedly press the
TIMER ON D10
button and set the time
in hours after which the portable air conditioner will turn on automatically. Wait
approximately 3 seconds and the automatic start function will be activated.
■
Now press the
TIMER OFF D9
button. The last set time and “h” (hours) will start
flashing on the display
D1
. Repeatedly press the
TIMER OFF D9
button and set the
time in hours after which the portable air conditioner will turn off automatically. Wait
approximately 3 seconds and the automatic start function will be activated.
2. Sleep function
The sleep function is used to reduce overnight power consumption.
Press button
D6
, and the
symbol will appear on the display
D1
. The portable air
conditioner will run in the last selected mode, however, this function cannot be set in
the fan and dehumidification modes.
