- 8 -
12/2019
Copyright © 2019, Fast ČR, a.s.
EN
Portable air conditioner
■
Prior to using this appliance, please read the user’s manual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’s manual.
Keep this user’s manual in a safe place where it can be easily retrieved for future use.
■
We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1
Control panel
A2
Horizontal flap
A3
Handles (located along both sides)
A4
Front panel
A5
Travel wheels
A6
Top air filter (behind a protective
grille)
A7
Top air inlet
A8
Top drain outlet
A9
Air outlet
A10
Bottom air filter (behind a protective
grille)
A11
Bottom air inlet
A12
Bottom drain outlet (only on models
with heating mode)
A13
Power cord holder
A14
Power cord outlet
A15
Power plug storage compartment
A16
Condensate drain hole
DESCRIPTION OF ACCESSORIES
B1
Adapter A for connection to the
back panel of the portable air
conditioner
B2
Round adapter
B3
Flexible air exhaust hose
B4
Flange with plug
B5
Dowels (4 pcs)
B6
Screws (4 pcs)
B7
Drain hose
B8
Gasket seal
B9
Window connection adapter
B10
Window insert
B11
Window insert plug
B12
„L” bracket
B13
Threaded screws (2 pcs)
B14
Foam strips
B15
Textile window gasket seal
DESCRIPTION OF THE CONTROL PANEL
C1
SWING button for moving the flaps
C2
TIMER button for setting the timer
C3
MODE button for selecting an
operating mode
C4
Minus (–) button
C5
Plus (+) button
C6
FAN button for setting the fan speed
C7
SLEEP button for setting the sleep
mode
C8
On/Off button
C9
Sleep mode indicator
C10
Fan speed indicators (high /
medium / low)
C11
Temperature unit icons °C / °F
C12
Display
C13
Follow Me indicator
C14
Operating mode indicators
C15
Timer on/off indicators
REMOTE CONTROL
D1
Display
D2
On/Off button
D3
MODE button for selecting an
operating mode
D4
TEMP button
▲ / ▼
D5
FAN button for setting the fan speed
D6
SLEEP buttons for setting the sleep
mode
D7
SWING button
D8
LED button
D9
TIMER OFF button for turning off
the timer
D10
TIMER ON button for turning on the
timer
D11
SHORTCUT button
D12
FOLLOW ME button
INSTALLATION
Installation location for the portable air conditioner
■
Locate the portable air conditioner on an even, dry and stable surface and within
reach of a grounded power socket.
■
For easier handling, the portable air conditioner is equipped with travel wheels
A5
.
Do not use the travel wheels
A5
when you need to move the air conditioner over
carpets or similar surfaces. Avoid riding over objects.
■
To achieve optimal efficiency, maintain a distance of at least 50 cm from the wall
or other obstacles.
Note:
Do not use the portable air conditioner to cool a room where computer
servers, etc. are located.
Installation, adjustment, maintenance and repairs must only be
performed by a qualified person.
Installing the flexible hose on to the portable air conditioner
■
The flexible hose
B3
must be connected to the portable air conditioner and installed
into a window in accordance with the operating modes that you wish to set. Install
the flexible hose
B3
when you wish to select the operating modes: cooling or
automatic mode. It is not necessary to install the flexible hose
B3
when you wish to
select the fan or dehumidification mode.
■
Extend the flexible hose
B3
to the required length. Put adapter A
B1
on to the end
of the flexible hose
B3
. Insert the flexible hose
B3
into the air outlet
A9
so that the
tab in the bottom part of adapter A
B1
fits into the cut-out in the air outlet
A9
. At the
same time, check that the hook in the top part of adapter A
B1
fits into the cut-out in
the air outlet
A9
. Turn it in the direction of the arrow to secure the hose
B3
in place.
■
Put the round adapter
B2
on to the free end of the flexible hose
B3
.
Installing the flexible hose into a slide window
■
The window insert
B10
is designed to be compatible with the majority of sliding
windows (vertical and horizontal). Nevertheless, for certain types of slide windows it
may be necessary to modify the installation procedure described below.
■
Open the sliding window sash and stick on the gasket seal
B8
along the entire
perimeter of the area where the window insert
B10
will be located. Place the
window insert
B10
into the window. Adjust the dimensions of the window insert
B10
to the width of the window (on a vertical slide window) / height of the window
(on a horizontal slide window). If necessary, cut away a part of the window insert
B10
if the window is too small. To prevent the entry of hot air or insects into the room, cut
off the foam strip
B14
so that it fits into the area between the windows. If necessary,
screw on the “L” brackets
B12
using the threaded screws
B13
to secure the position
of the window in which the window insert
B10
is installed. Insert the flexible hose
hose
B3
with the attached adapter
B9
into the hole in the window insert
B10
.
Note:
Avoid excessive bending of the hose. To ensure proper operation of
the portable air conditioner, it is important not to overload the hose
or to bend it unnecessarily. Excessive loading or bending may damage
the hose.
Installing the flexible hose using the textile gasket seal
■
The textile gasket seal
B15
is suitable for tilt-open, sash and roof windows. The textile
gasket seal
B15
is fitted with a Velcro zip tape to make its installation in the window
easier. Open the window and into the created crevice install the textile gasket seal
B15
. We recommend that you thoroughly degrease the location where you will be
attaching the textile gasket seal
B15
using an appropriate cleaning agent. Remove
the protective paper strip and stick the tape on to the window frame.
■
In order to be able to insert the flexible hose
B3
, the gasket seal is fitted with an
integrated zip. Open the zip in such a location that will enable you to easily insert
the flexible hose
B3
.
■
It is not necessary to remove the textile gasket seal
B15
from the window when not
using the portable air conditioner. The window can be closed even with the gasket
seal installed.
Installing the flexible hose into a wall
■
It is important that the installation into a wall is performed by a qualified technician.
■
Drill a hole into the wall with a hole diameter of 125 mm at a height between 30 cm
and 120 cm from floor. Insert the flange with plug
B4
into the hole and secure it to
the wall using the set of screws
B6
and dowels
B5
.
■
Extend out the flexible hose
B3
, open the plug of the flange
B4
and insert the
flexible hose
B3
into the flange. Avoid excessive bending of the hose.
■
When not using the portable air conditioner, close the plug on the flange
B4
.
Note:
To ensure proper operation of the portable air conditioner, it is
important not to overload the hose or to bend it unnecessarily.
Excessive loading or bending may damage the hose.
CONTROLS OF THE PORTABLE AIR CONDITIONER
A.CONTROL PANEL
■
Insert the power plug into a power socket. Now the portable air conditioner sets
itself to the stand-by mode.
Turning the portable air conditioner on and off
■
To turn on the portable air conditioner, press button
C8
. Press it again to turn the
portable air conditioner off.
Note:
Never turn off the portable air conditioner by pulling the power cord
out of the power socket. Turn off the portable air conditioner using
button
C8
, wait a few minutes and then pull out the power cord.
OPERATING MODES
1. Cooling mode
■
Repeatedly press button
MODE C3
until the cooling indicator
is lit. Using the
– / + buttons, set the desired temperature. You can set the temperature in the range
from 17 to 30 °C.
■
Using button
FAN C6
, set the fan speed. Repeatedly press button
FAN C6
to switch
the speed in the following order:
(high speed) –
(medium speed) –
(low
speed) – automatic speed (depending on the model, all indicator lights are either
lit or not lit). Each time the button is pressed, the respective indicator will be lit on
the control panel.
2. Fan mode
■
Repeatedly press button
MODE C3
until the fan mode indicator is lit. Using
button
FAN C6
, set the fan speed. Repeatedly press button
FAN C6
to switch the
speed in the following order:
(high speed) – (medium speed) – (low speed)
– automatic speed (depending on the model, all indicator lights are either lit or not
lit). Each time the button is pressed, the respective indicator will be lit on the control
panel. In this mode, it is not possible to set the temperature, nor is it necessary to
connect the flexible hose
B3
to the portable air conditioner.
