EN-5
#
$
A.
3. Emergency unit operation key
In case the battery runs out in the remote control, or the remote control becomes defective, use the
emergency operation key. (
) .
Control key (this key
can only be used by
a service technician).
Emergency operation
key
• Only type with cooling
Always, when the key is pressed, the setup is changed to the sequence COOL
STOP.
• Type with heat pump
Always, when the key is pressed, the setup is changed to the sequence COOL
HEAT
STOP.
The following table states conditions - set temperature, fan speed and vent setup during emergency
operation.
Mode
Set temperature
Fan speed
Vertical vent
Cooling
24 °C
High
Moves
Heating
24 °C
High
Moves
4. Horizontal inclination of vents
If the air-conditioner is in operation, then you can turn it off with the use of the remote control. Manually
shift the vent in the vertical setup in the direction of air circulation so that it is set in the upper position.
To tilt the horizontal vent, take the ends with your fingers and move them to the right or left as
necessary. Never tilt the vents of the horizontal setup of air circulation while the air-conditioner is in
operation.
#
$
A.
DESCRIPTION OF THE AIR-CONDITIONER
