background image

KYOCERA-SENCO Industrial Tools, Inc.

8450 Broadwell Road 

Cincinnati, Ohio 45244

 

www.senco.com

© 2021 by KYOCERA-SENCO Industrial Tools, Inc.

Limited Warranty 

SENCO

®

 Pneumatic, DuraSpin

®

, Cordless Tools 

& Compressors

KYOCERA-SENCO Industrial Tools, Inc. (“SENCO”) designs and constructs its products using the highest standards of material and workmanship. 

SENCO warrants to the original retail purchaser that the following products will be free from defects in material or workmanship for the warranty period 

Products

New

Reconditioned

Products

New

Reconditioned

Pneumatic Tools 

Ü

Five Years

One Year

Air Compressors

One Year

90 Days

Fusion Tools

Two Years

Six Months

Combo Kit Tools

One Year

90 Days

Gas Tools

Two Years

Six Months

Multi-Blow Hand Nailers 

One Year

90 Days

Duraspin Tools

Five Years

90 Days

Stapling Hammers 

One Year

90 Days

Ü

 = Both XP and Pro Series

During the warranty period (which begins on the purchase date), SENCO will repair or replace, at SENCO’s option and expense, any product or part 

that is defective in materials or workmanship after examination by a SENCO Authorized Warranty Service Centre, subject to the exceptions, exclusions 

and limitations described below. Any replacement product or part will carry a warranty for the balance of the warranty period applicable to the replaced 

product or part. A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS REQUIRED TO MAKE A 

WARRANTY CLAIM. Warranty registration is also required and can be accomplished through on-line Product Registration at www.senco.com or by 

completing and returning the postage paid warranty registration form included with your Operator’s manual/parts chart information, found inside the 

product carton. To make a warranty claim, you must return the product, with proper receipt/proof of purchase and return transportation charges prepaid, 

to a SENCO Authorized Warranty Service Centre. A list of SENCO Authorized Warranty Service Centres can be found at www.senco.com or by calling 

1-800-543-4596 toll free. SENCO will perform its obligations under this warranty within a reasonable time after approval of the warranty claim.

SENCO Cordless:

1.  Subject to the exceptions, exclusions and limitations described below, SENCO warrants that the SENCO Cordless tool will be free from defects 

in materials and workmanship for two years after the purchase date. 

2.  SENCO warrants that the batteries and chargers used with SENCO Cordless tools will be free from defects in material and workmanship for 

one year after the purchase date.

Warranty Exclusions

The following warranty exclusions apply:

1. 

seals, driver blades, piston stops, and piston/driver assembly.

2.  This warranty does not cover parts damaged due to normal wear, misapplication, misuse, accidents, operation beyond the recommended 

speeds or voltage (electric units only), improper storage, or damage resulting from shipping.

3.  Prod

4.  Labour charges or loss or damage resulting from improper operation, maintenance or repairs are not covered by this warranty.

General Warranty Conditions

This warranty will be honoured only if:

A.  Clean, dry, regulated compressed air has been used, at air pressure not exceeding the maximum indicated on the tool casting;

B.  No e

C.  No d

maintenance instructions).

THIS WARRANTY IS THE ONLY WARRANTY ON THE PRODUCT, AND SENCO DISCLAIMS ALL OTHER WARRANTIES. ANY IMPLIED WAR-

RANTIES WILL BE LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD SPECIFIED ABOVE. SOME STATES DO NOT ALLOW 

LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOUR REMEDIES ARE 

SOLELY AND EXCLUSIVELY AS STATED ABOVE. SENCO SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, 

OR SPECIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, 

SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, 

WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL SENCO’S LIABILITY EXCEED THE PRICE OF THE PRODUCT WHICH 

HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE 

EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE. NO EMPLOYEE OR REPRESENTATIVE OF SENCO OR ANY DISTRIBUTOR OR 

DEALER IS AUTHORIZED TO MAKE ANY CHANGE OR MODIFICATION TO THIS WARRANTY.

Replacement of Tool Due to Natural Disaster

Such a claim will be honoured provided that the original retail purchaser had previously submitted a completed warranty registration card for the tool, 

and then submits proof of ownership and an acceptable statement describing such Act of God documented by an insurance carrier, police department, 

Customer Satisfaction

If for any reason the product does not perform to the original purchaser’s satisfaction, it can be returned to the place of purchase within thirty days with 

dated sales receipt for a full refund of the purchase price (applies to new product sales only).
© 2019 KYOCERA-SENCO Industrial Tools, Inc.

CINCINNATI, OHIO 45244-1611 USA

www.senco.com

160101

14

Summary of Contents for SN71P1

















Reviews: