| 30 |
EN
3
Technical Characteristics
3.1 Technical specifications
Dry diamond drill type
ID3150
Operating voltage (V / Hz)
~230 / 50 / 60
Power consumption (watt)
1800
Protection class
/ II
Speed (min
-1
)
1650
Core drill bit diameter, hand-guided (mm)
100 – 150
Impact frequency (imp)
33000
Bit holder
M18
Weight (kg)
1)
5.2
Speed electronics
Yes
Sound measurement
2)
K = 3 dB
L
pA
(sound pressure) dB (A)
92
L
WA
(sound power) dB (A)
99
Vibration measurement:
3)
K = 1.5 m / s
2
Front handle (11)
1
m / s
2
Rear handle (2)
1
m / s
2
5.5
1)
Weight according to EPTA procedure 01/2003.
2)
Measured values for noise determined according to EN 60745.
Wear hearing protection!
3)
Total vibration values (vector sum in three directions) determined according to EN 60745
The vibration emission values given in this instruction manual have been measured according to a method
of measurement standardised in EN 60745 and can be used for comparison between power tools. They
are also suitable for a preliminary estimate of the vibratory stresses.
The vibration emission values given represent the main applications of the power tool. If the power tool is
used for other applications, with different insert tools or are insufficiently serviced, this can significantly
increase the vibratory stresses over the whole work period. For a precise estimate of the vibration
emission values, the times during which the tool is switched off or is running but not actually in use should
also be taken into account. This can reduce the vibration stresses over the whole work period significantly.
WARNING
Health risk due to vibrations.
Î
Additional safety measures should be taken to
protect the user, e.g. wearing anti-vibration pro-
tective gloves, correct maintenance of power
tools and insert tools, keeping hands warm and
good organisation of work sequences.
